Opale Paramodels SPLIT 5.0 mit Mike XL RC-Paraglider part 2v2

Описание: Mix of the best Rc Paragliders technologies you can find.

Monosurface, double surfaces, hybrid, are well known technologies and mastered by Opale Paramodels. It is no longer necessary to be concerned, our new hybrid technology will open up new flight perspectives.

The Split 5.0 has a midway separation between the leading edge and the trailing edge. The first 50% are double surface, naturally pressurized with the airspeed of the wing and the remaining 50% are single surface, facilitating takeoff in a few steps, simple and easy, accessible to anybody.

The double surface leading edge provides a better penetration into the air (low angles of attack), but it is also designed to generate an higher internal pressure, offering the best ever passive security.

His behavior in flight is simple, reassuring and from the first takeoff. With low arms movements, the trajectories are fluid and progressive. By increasing to their maxima, the Split 5.0 becomes extremely agile and playful.

The use of the Speedbar (accelerator) has also been optimized. 5cm to 7cm can be reached, we can get significant speed gains, without having frontal collapses.

To summarize, it is the essential wing for radio-controlled Paragliding and Paramotoring for any pilot wishing to learn or progress in complete safety in a range of 5m wingspan.


Mike XL - Paraglider

The Mike pilot is a concept developed a few years ago with the L version. Building on the success we have had, we have declined this one in its XL version.
Technologies :
First use of the arm movement optimization system:
Gain of 30% strength in the hand
Hyper realistic movement like a real paraglider pilot
Mechanical protection of the servomotors
Precision and mechanical play never achieved thanks to the use of 8 ball bearings
Gain flight speed and optimize your trajectories: location for 2 speedbar servomotors and/or harness weight balance
Fast descent manoeuvre: possibility of using 2 servomotors to perform the ears (closures of the ends of the wing to perform rapid descents, like real size)
Addition of an auxiliary engine for Soaring / Thermal flight on difficult flight places
Hyper resistant and articulated legs Can be attached to the Backpack XL2 in 30s
Customize the pilot's head: for more fun, the heads are interchangeable at will in a few seconds. Delivered raw, you can easily customize the colors as you wish.
Increase realism with the addition of model instruments, such as VHF, Alti Vario


Motor set:
This auxiliary engine kit includes everything needed to unleash the potential of your Mike XL pilot
This auxiliary motorization kit will allow you to gain altitude and operate your pilot in optimal free flight conditions, with ultra-low power consumption guaranteeing you record flight autonomy.

Mounting is quick and requires no pilot modification.
Thanks to its clever design, you can integrate it in a few minutes. It also disassembles quickly.
Engine cooling is optimized with the pilot's harness and 3D engine mount design.