7mm Tiny Whoop - powerful ducted micro brushed acro whoop (aka "Tiny Mute" build) - BUILD LOG

Описание: I have been trying to find a good balance between small size, light weight and adequate power for a tiny whoop build for a while now.
After the X-Racer X-1 launch I was convinced that a 6mm whoop frame size (~65mm) with 7mm motor mounts is the way to go. The frame has a very nice layout and allows for a low profile whoop with a nice and light canopy (approx. 1 gram).

So, parts selection was the most important thing in order to keep the weight to the absolute minimum, without any sacrifices.
The flight controller used in the Tiny 6 and Tiny 7 micro quads by KingKong combines a VTx on the same board and makes a great combo with the tiny and reliable uSky receiver design by Simon (aka Fishpepper).
PH2.0 battery connector and batteries are a must for reliability and performance and a micro 1000TVL camera completes the build nicely - albeit not being that good in low light situations.

This combination of parts will easily get you an insanely enjoyable acro tiny whoop with plenty of power and good flight times. If you are preparing for an indoor "winter build" you should definitely consider this one. After all, it is currently my favorite whoop and I strongly recommend building one.

This is BUILD LOG: 7mm Tiny Whoop - powerful and lightweight micro brushed ducted acro 1S drone (aka "Tiny Mute" build) - Let's go!

____________________
If you like my content and want to support the channel, you can use the affiliate links below. I get a small kickback from the store if you decide to buy something and it costs nothing extra to you.
Thank you in advance!

Flight Controller with built-in VTx (used in the Kingkong Tiny 6 and Tiny 7):
https://goo.gl/JDPmqT (Gearbest)
https://goo.gl/TN72zD (Ebay)
https://goo.gl/cYTXFi (Everbuying)
https://goo.gl/qR9pJ4 (Aliexpress)
https://goo.gl/rZGfKs (MyRCMart)

Receiver (Fishpepper's uSky FrSky tiny Rx design):
https://goo.gl/reH9Ch (FlexRC)
https://goo.gl/edPfqD (Ebay)
For more info you can visit fishpepper's website: https://goo.gl/fc7gh3 (Fishpepper)
Other FrSky micro Rx options can be the FD800 (used in the Aurora68): https://goo.gl/v8gzsJ (Banggood)
the AuroraRC Pro Mini: https://goo.gl/CH42up (Gearbest)
or this one : https://goo.gl/9cXS9f (Banggood)

FlySky Rx option: https://goo.gl/oWAJ7b (Banggood)
DSM2/DSMX Rx option: https://goo.gl/uLjgnb (Banggood)

Frame and canopy (X-Racer X-1):
https://goo.gl/nZD9V7 (FPVmodel)
https://goo.gl/tHcT8P (Ebay)

Motors (7x16mm 14000kV coreless/brushed):
https://goo.gl/Qq1Uxy (FPVmodel)
https://goo.gl/yXxYG3 (Ebay)

The frame and motors are also available as a bundle, including props and spares:
https://goo.gl/h9JbWR (FPVmodel)
https://goo.gl/XCpymz (Ebay)
If you want a similar (but a bit heavier) build, you may also consider a BNF X-1: https://goo.gl/u1hJv4 (FPVmodel)

Propellers (4-blade or 3-blade - 31mm size):
https://goo.gl/A1kmGU (Banggood)
https://goo.gl/9RBWH4 (Gearbest)
https://goo.gl/ffNXCb (FPVmodel)
https://goo.gl/56fz5r (Ebay)

Camera (1000TVL - not that good in low light situations):
https://goo.gl/TUsFbS (Banggood)
https://goo.gl/wji8uG (Gearbest)
https://goo.gl/kU6S1F (Ebay)

Batteries with PH2.0 connector that I currently use:
BetaFPV 230mah LiHV: https://goo.gl/smR7BM (BetaFPV)
BetaFPV 260mah LiHV: https://goo.gl/dFyuR9 (BetaFPV)
NewBeeDrone Nitro Nectar 250mah LiPo: https://goo.gl/qeVhHS (NewBeeDrone)
NewBeeDrone Nitro Nectar 250mah LiHV: https://goo.gl/E6XtJy (NewBeeDrone)
GNB Gaoneng 250mah and 260mah LiHV (can't find a vendor carrying their PH2.0 range at the moment)

Silicone wire is easier to solder, more flexible and more resistant and reliable overall - plenty of colors and AWG sizes to choose from:
https://goo.gl/BTVnsC (HobbyKing)
https://goo.gl/N2KekM (Banggood)

PH2.0mm right angle battery connector: https://goo.gl/rCLtyt (Ebay)
Ready to use straight PH2.0 connector with battery leads: https://goo.gl/qTcmRf (NewBeeDrone)
or: https://goo.gl/uPRHTo (TinyWhoop)

Rubber bands for the motor wires: https://goo.gl/tWZmBi (Banggood)
You can also use dental rubber bands (used for braces): https://goo.gl/J6QNsU (Ebay)


👍 PLEASE SUPPORT the MuteFPV channel:
-------
👍 Join my PATREON: http://mutefpv.com/patreon
👍 Tip my 'piggy bank' via PAYPAL: http://mutefpv.com/paypal

👍 Save and use these BOOKMARKS before purchasing new goodies (please bookmark the SHORTLINKS in your browser):
BANGGOOD: http://mutefpv.com/banggood
AMAZON (paid link): http://mutefpv.com/amazon
GETFPV: http://mutefpv.com/getfpv
EBAY: http://mutefpv.com/ebay
ALIEXPRESS: http://mutefpv.com/aliexpress
REELSTEADY: http://mutefpv.com/reelsteady

👍 THANK YOU in advance for your support!

(As an Amazon Associate I earn from qualifying purchases.)


This video features the song "The Rover" by S Strong, available under a Creative Commons License
Song link:   / s-strong-the-rover  
Artist link:   / s_strong  
CC-by license: https://creativecommons.org/licenses/...



#muteFPV
#FPVbuild