DIY Fighter Aircraft Bunker Diorama for 1/200 Scale Fighter Models

Описание: I this video I have made a very simple aircraft bunker for my 1/200 scale Diecast Jet Fighters.
As you can probably see that this is not very detailed and that is because I wanted it to keep it simple so that everyone can take inspiration from it and make it.
The Taxiway and the Bunker area on the base were printed on a sticker paper and to add more realistic effect to the grass, velvet paper was used which is widely available is stationary shops.
5mm Diffused Yellow LED is used inside the bunker and 3mm diffused LED are used for the taxiway with each LED being 1/2 inch apart. Use Diffused led as the scatter light in all direction, this will make the model look more realistic and if you cannot find on then just buy some normal led and use a sand paper to rough up it's surface.
As I am using a 9v battery to power this up, I added some resistors of around 600 to 900 ohm( could be different for different LEDs ) in series with the led rows. Make sure to connect each LED color individually to the battery, this is because different color LEDs work on slightly different voltage and current so if you connect them all together the some colors may glow bright and some super dim.
The material used as base and to make the structure of the bunker is called "SUNBOARD" or "FOAM BOARD SHEET". It is very easy to cut and is sturdy enough for these small dioramas. It is further strengthen with some wooden cutouts.

Suggestions:
1. To add more realism to the Taxiway use the rough side of a sand paper and paint it black. This would give a nice rough to the road.
2. Space the bunkers apart if you have more room to play with as in real life bunkers are placed quite far apart from one another.

Hopefully you like this build and let me know if you guys want the image of the base, I'll add a link to it so you can also make this diorama.

For any business queries contact us at [email protected]