ASP Dual Forms with UV GEL

Описание: Learn more about UV Gel nails in my Gel Nail Playlist click below:
   • UV Gels for Nails - All you need to know a...  

Several of you have requested that I show you how to use the ASP Dual forms with gels so here it is.You can do this same exact method with non soak off gel also and or builder soak off gel(which is what I recommend if you don't want the gel to run all over the place).I also suggest that you use a good UV lamp preferably a 36 watt 4 bulb lamp.It cures the gels the best and prevents lifting.
Once you finish applying all the forms with the gels you can also flip the fingers upside down and apply some more gel to the underneath part of the nail so that you are ensured to have enough gel to give your nails more strength at the stress area. Ideally if you have a nail drill you can clean the underneath part out with a small bit to even out the gel.Which is what I ended up doing after I shot the video, as I did have a little bit of unevenness to the underneath part. This method can also be done with acrylic if you apply a little extra to the underneath part of the nail form before you remove the Dual Form. Lastly Refills are pretty much the same way as you apply them ..
1 Push back cuticles and remove Pterygium (is a medical condition in which the skin grabs onto the nail plate and grows forward as the nails grows out)
2 File and buff the entire nail taper down the free edge if needed and take down the length if you wish
3 Cleanse nails
4 Measure the ASP Dual Form make sure it fits side wall to side wall
5 Prime and or dehydrate the nail plate
6 Use IBD bonder if you are using IBD gels and cure 1 minute in the UV lamp
7 Apply one thin coat of gel to the entire surface of the nail and cure for 1 minute in the UV lamp I recommend you use a 36 watt lamp to cure properly.
8 Apply gel to the inside of the ASP form
9 Press the form into the nail and hold it down while its pre curing for 20 seconds firmly.
10 release your finger and allow the form to cure for a full 3 minutes
11.Remove the ASP form and shape the sidewalls and free edge
12 You don't need to remove the sticky layer as there is None after the removal of the ASP Form
13 You will need to remove the sticky layer from the Underneath part of the nails after you cure with the form. You need to remove the dispersion layer off the nails. Use some rubbing alcohol and cotton pad to remove it.
Enjoy your beautiful gorgeous nails
I ended up keeping mine on for almost 2 weeks.I only soaked them off because it was impossible to type as fast as I do without the very long nails.But hope to do this again they certainly make your hands feel very glamorous and elegant.

You can find the ASP forms at Sally Beauty Supply Here is a link:
http://www.sallybeauty.com/form-a-nai...
Follow me on Facebook:   / annanailartsecrets  
Follow me on Google+ https://plus.google.com/u/0/b/1055400...
Follow me on Twitter:   / anabeautysecret  


Royalty Free Music: Dan-O
Song" Little Island"
http://danosongs.com/danosongs.com-li...