How to change a tire on the Acedeck Quick-Release Hubs?

Описание: Acedeck Quick-Release Hubs- Tire Removal & Installation Guide

【Tools required】
Hex key
Air pump

【Tire Removal】

Step 1: Remove the tire
Remove the valve cap.
Use a hex key to release the air from the inner tube.

Step 2: Release the tire
Press down on the tire and the tire release ring.

Step 3: Remove the retaining ring
Rotate the retaining ring until it aligns with the notch.
Lift the retaining ring straight upward to remove it.

Step 4: Separate the tire from the hub
Push the valve of the inner tube into the tire.
Separate the tire from the hub.

Step 5: Remove the inner tube
Carefully remove the inner tube from the tire.

【Tire Installation】

Step 6: Install the inner tube
Place the inner tube inside the tire.

Step 7: Pre-inflate the inner tube
Remove the valve cap.
Use an air pump to slightly inflate the inner tube until it sits evenly against the inner wall of the tire.

Step 8: Install the hub
Insert the hub into the tire.

Step 9: Install the retaining ring
Reinstall the retaining ring.
Make sure the ring is fully seated inside the hub.

Step 10: Inflate the tire
Use an air pump to inflate the tire.
Recommended pressure range: 28–38 PSI.

Step 11: Final check
After inflation, check that the tire and hub are properly aligned.

Tire installation complete ✅

#acedeck #electricskateboard
#acedecktutorial #acedeckboards