Woodturning - Maple burl bowl.

Описание: Hi, welcome to the channel. In this video I take a maple burl cap and make a bowl/platter on the woodturning lathe.

I began by drilling a hole, roughly centre of the thickest bit, I then mounted it to the jaws with a worm screw. Originally I wanted to mount this piece with a tenon but on the fly that changed to a mortice.

After flipping the piece and formed the bowl I wanted to create a ripple detail in the wood but also keep a strip of the bandsaw cut edge. This took some time but a freshly sharpened gouge and lots of hand sanding it was acceptable.

Shellac and wax finish and we're good to go!

The music is an original piece from a collection I have written and recorded to accompany my videos.

My Starbond affiliate link:
https://www.starbond.com/?rfsn=539453
Use the code: TFTURNING for 15% off!
Purchases via this link earn me a little commission at no cost to you so thank you in advance!

Thanks for watching, please feel free to leave a comment on what you liked or disliked. If you're new here and you enjoyed this, please consider subscribing to my channel. If you have been here before, then thank you for your continued support, it means a lot!


Sometimes my pieces are for sale, you can visit my Etsy store here:
https://www.etsy.com/uk/shop/tfturning

Alternatively, if you would like to donate and help support the channel, you can here:
https://paypal.me/tfturning
This money will go towards the purchase of tools and materials for more turning content.
No amount is too small and I appreciate every single penny sent :)


#woodturning​​​​​​​​​ #maple #burl​



*These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk, my practices may not always be correct or the safest. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.