Fisker Ocean Amplifier and ADAS module access in right rear of cabin, full trim removal

Описание: The Fisker Ocean Amplifier is not mentioned in the service manual and there is only a small mention of the ADAS module removal. The manual specifies how to remove the left rear interior, but does not specify the right rear trim where these components are located. There are several hidden fasteners (inside the accessory power panel is the most difficult to access) that are not mentioned in service manual either. This video shows how to remove trim and where Amplifier and ADAS module are located.

The fasteners can be found at: https://www.amazon.com/dp/B0CGZT26L7?ref=p...

The sequence for removal:
Disconnnect 12v and pull firemans loop.
Pull back weather stripping on rear hatch and passenger rear door
Remove rear cargo cover and cargo tray (has two spin connectors)
Remove rear hatch lower body trim
Remove C pillar upper trim with small speaker, only 4 push connectors
Loosen passenger rear door body trim by pulling forward
Remove small circular trim cover and T30 torx bolt from main upper plastic trim panel, remove panel with trim tool (multiple push connectors), rotate upper trim forward on seat belt.
Remove upper phillips push connectors from upper main lower trim panel, remove courtesy light
Remove circular plug in accessory power panel and t30 torx deep in panel
Remove lower t30 Torx from main lower trim. Remove covers from interior of lower cargo anchors and torx bolts
Pull lower trim panel out and disconnect 12v connector (110v can remain).

Reinstall in reverse, reconnect battery cables, recalibrate doggie window with OLP.