CISCO nat overload

Описание: ****** mikrotik
ip address/add address=10.61.1.1/24 interface=ether5
ip address/add address=203.0.113.2/29 interface=ether1
ip dhcp-server/
/ip/dhcp-server setup
ip firewall/nat add chain=srcnat out-interface=ether1 action=src-nat to-addresses=203.0.113.5 comment=internet
ip route add dst-address=0.0.0.0/0 gateway=203.0.113.1
**** CISCO
conf t
interface fastethernet1/0
ip address 192.168.2.1 255.255.255.0
no shut
ip nat inside
*** config wan
interface fastethernet0/0
ip address 5.0.0.5 255.255.255.248
no shut
ip nat outside
access-list 15 permit 192.168.2.0 0.0.0.255
ip nat inside source list 15 interface fastethernet0/0 overload
ip route 0.0.0.0 0.0.0.0 5.0.0.1
##VER AS INTERFACES
show ip interface brief
###VER AS CONFIGURAÇÕES DO NAT
Router(config)#do show running-config | include nat
config# service dhcp
config# ip dhcp pool rede10
config# network 192.168.2.0
config# default-router 192.168.2.1
config# dns-server 208.67.220.220
config# lease 20
config# end
###Se quiser ver tudo relacionado ao DHCP:
show running-config | include dhcp
##lista de entrega de IPS
do show ip dhcp binding
#SE O CLIENTE USA ENDEREÇOS EXCLUIDOS LIMPE O LEASE
#clear ip dhcp binding *