How to Clean your Glowforge Lenses

Описание: Steps to cleaning your lenses

1. Turn on your machine.
2. Spray off areas near lenses, camera and mirrors with canned air.
3. Gently brush off lenses to prevent scratch when wiping the lenses
4. Wipe off camera with wipe.
5. Remove head of the glowforge.
6. Spray off fan with canned air (optional)
7. Wipe down the two lenses on either side of the hole at the bottom.
8. With your blue lens tool, remove your lens putting the magnetic side in pull out your lens.
9. Brush and wipe your lens on both sides, and (paying attention to the arrow on your lens or putting the concave side up) reinsert the lens.
10. Remove the top part of the head and remove the blue mirror at the top, brush, and clean and then reinsert.
11. Wipe down the lenses on the left of the head and the one on the arm on the left side of your machine.
12. Reattach the head if necessary and fire up your machine!

Do not use a course brush and check and make sure that your brush can be used for this purpose. If you are unsure, skip the brushing altogether!


Materials Needed.
1. Blue Lens tool provided from Glowforge
2. Canned air and brush (optional)
3. Zeiss Lens Wipes (available on Amazon or in most larger stores)

Ready to upgrade to a commercial laser? Wanting to take your laser business to the next level? Glowforge too slow and need something bigger faster, or stronger? Check out Aeon Lasers! I have a Mira 9 myself and love it!
If you’d like more information on Aeon Lasers, please show me some love by clicking on my partner link below and then clicking on the “Get Started!” button. If you found this video helpful, make sure to mention Rachel Thorman in the referral field, or if you decide to DM or call, tell them Rachel Thorman sent you. Please help me get compensated so I can continue doing what I love, playing with my laser, and bringing fresh content!https://aeonlaser.us/contact?ref=RACH...

Interested in purchasing a Glowforge? Glowforge was my 1st laser and I still love and use it today! Save up to $500 on your Glowforge with my referral link! https://glowforge.us/r/TXVNNTMY

Store and Socials
Check out our Etsy shop at https://www.etsy.com/shop/LaserandLearn
Follow us on Tik Tok @laserandlearn
Follow us on Instagram @laserandlearn
Like us on Facebook @laserandlearn

Disclaimer. I am not liable for anything that goes wrong with your machine or any financial problems you may encounter as a result of this video. This is merely my experience on how to successfully work with your machine!