Modeling Silos (Circular and Rectangular) in Autodesk Robot | Part 5: Steel Design

Описание: In this video, we'll explore the design of reinforced concrete silos in Autodesk Robot. This is the first part of our series on modeling silos, where we cover the design of both circular and rectangular silos.

We'll start by discussing the basics of silo design, including the different types of loads that silos are subjected to and the design codes and standards that govern their design. We'll also cover the importance of proper modeling and analysis in the design process.

Next, we'll dive into the specifics of designing reinforced concrete silos in Autodesk Robot. We'll cover topics such as defining the geometry of the silo, applying loads, and analyzing the structure using finite element analysis.

We'll also cover the design of the silo. We'll provide step-by-step instructions and helpful tips to guide you through the design process, and we'll use real-world examples and case studies to illustrate the concepts and principles discussed.

Whether you're a student, a practicing engineer, or simply interested in the design of reinforced concrete structures, this video will provide you with valuable insights into the design of silos in Autodesk Robot.

Links:
https://drive.google.com/file/d/1nXTF...

Current Video Ideas for the Future:
More details about modal participation / report?
Masses and stiffnesses to control modes
LL Reduction in ACI/ASCE (vertical and horizontal)
A possible way to model columns with pressure areas
Deeper dive into slab reinforcement.
Raft with larger thickness and positions
Robot - seemingly - erratic deformation when supported by beams and columns
A way to manually “clean-up” simple mesh like the above
Simple TBM tunnel lining analysis in robot

Timestamps:
0:00 Introduction
1:07 Quick Explanation of a Prev. Video
4:52 The problem of Loads on Cylinders
7:47 The Plan
11:38 Keep an Eye on The Mesh!!
12:58 Implementation of the Plan
21:29 Loads
24:51 Nice Trick for Linearly Increasing Load
31:46 Hopper Loads
32:37 Possible Error? (No)
36:06 Running Analysis and Results
36:53 Puzzled by low deflection??
39:19 Design Part
43:47 Stress Analysis (High Level Stuff)
46:53 The Von Mises Stress
49:47 Shout out to Prof. Udo Nackenhorst, IBNM LUH
50:02 Von Mises Cont'd
51:25 Design Check of Plate
53:11 Modifying the Layer of Stress Results
54:58 Practical Thinking
58:01 Outro