Make a Sphere from Firewood and Epoxy Resin! // Woodturing (Ep. 95)

Описание: In this video I show how I made a sphere-ish orb from a piece of eucalyptus firewood after filling the voids with colored epoxy resin. The process is really simple it just takes time to prepare the wood for turning and make a couple cup jigs for the lathe head and tail stocks to hold the sphere to true it on multiple axes. I used a combination of carbide scrapers and gouges to turn the sphere. The final shaping was done with the wings of a fingernail grind bowl gouges. To finish the sphere I sprayed on 15 coats of lacquer, sanded from 120 grit to 12,000 grit, and polished on a buffing wheel with wax. I also made a small stand from a little bit of left over resin from a previous resin pour.
Please Subscribe, it's FREE!

A very special thanks to Tim Holiner for supporting my work on Patreon.
Help me continue making quality content by becoming a Patron of the show and get early video releases and other rewards as little as $1:   / seanrubino  

***See a list of my tools here: https://spunjinworks.com/2016/03/01/t...

Products I used in this project: (Affiliate Links)
ArtResin 1 Gal - https://amzn.to/2B8AzVt
Mica Powders - https://amzn.to/2UyX273
Jet lathe (comparable to mine) https://amzn.to/2HCiMLO
Starbond CA Glue Thin - https://amzn.to/2Eh2wxN
Starbond CA Glue Medium - https://amzn.to/2Ehv22m
Turning tool https://amzn.to/2HLkZC9
Carbide scraper https://amzn.to/2JbwvpY
Milwaukee M12 1/4” Hex Driver - https://amzn.to/2zKl32f

Other videos referenced in this video:
Finishing -    • Apply an Oil Varnish // How-To (Ep. 49)  
Vanity -    • Seamless Modern Walnut Vanity // How-To (E...  
Work Station -    • BEST DIY Assembly Table with Tons of Stora...  

Follow me on Instagram   / seanrubino  

Check out The Dusty Life podcast http://thedustylife.com and get yourself a T-Shirt or Hoodie.

Get a SpunjinWorks T-shirt at https://spunjinworks.com/
Other Social Media:
Twitter   / seanrubino  

Soundtrack:
Cherubs by Josh Woodward https://www.joshwoodward.com Creative Commons — Attribution 4.0 International — CC BY 4.0 https://creativecommons.org/licenses/... Music promoted by Audio Library    • Cherubs – Josh Woodward (No Copyright Music)  

In this video I show how I made a sphere-ish orb from a piece of eucalyptus firewood after filling the voids with colored epoxy resin. The process is really simple it just takes time to prepare the wood for turning and make a couple cup jigs for the lathe head and tail stocks to hold the sphere to true it on multiple axes. I used a combination of carbide scrapers and gouges to turn the sphere. The final shaping was done with the wings of a fingernail grind bowl gouges. To finish the sphere I sprayed on 15 coats of lacquer, sanded from 120 grit to 12,000 grit, and polished on a buffing wheel with wax. I also made a small stand from a little bit of left over resin from a previous resin pour.