How to Replace Engine Torque Strut Mount 2012-2018 Ford Focus 2.0L L4

Описание: Buy Now!
New Engine Torque Strut Mount from 1AAuto.com https://trq.video/ib-1AEMT00732

This video shows you how to install a new engine torque strut mount from TRQ on your 2012-2018 Ford Focus (2.0L L4). The torque strut engine mount braces the engine against twisting, shaking, and vibrating when under load, and when load changes suddenly. The rubber bushings on the torque strut mount will wear down over time, and need to be replaced, even if the strut itself is in good condition. You'll know it's time to replace the torque strut engine mount when you feel vibration or shaking, especially when accelerating.

This repair was done on a 2016 Ford Focus SE 2.0L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus

Tools you will need:
• 15mm Socket
• Torque Wrench https://trq.video/ob9o-1AXAA00044
• Gloves https://trq.video/ocPp-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.