How to build a pump foil board | Part 3 / 4 | Fiberglass Laminating and Vacuum Bagging

Описание: Welcome to Part 3 of my pump foil board build series! In this video, I demonstrate the fiberglass lamination process. Watch as I mask off the underside, apply fiberglass and epoxy resin, and use a vacuum bag to ensure a smooth, strong finish. I also trim excess fiberglass and prepare the surface for the next steps. If you’re following along or just curious about the process, this detailed guide will help you understand each step. Don’t forget to like, comment, and subscribe for more updates!

0:00 Intro
0:10 Masking the Underside
1:09 Laminating the Blank
2:14 Applying the Peel Ply
3:16 Wrapping in Absorbent Material
3:52 Vacuum Bagging
5:06 Unpacking and Removing the Peel Ply
6:14 Trimming the Excess Fiberglass
8:34 Sanding the Underside
9:40 Outro

🟦 Download’s:
📃 Temples and drawings
🔗 http://tiny.cc/nynjzz

🟦 Tools:
🛠️ Tools is used in this build

🛒 Vacuum compression bags
🔗 https://amzn.to/3T59ds7

🛒 Utility knife
🔗 https://amzn.to/3z1umfZ

🟦 Materials:
📦 Materials I used in this build

🛒 Styrodur rigid foam board '2800 C' 30 mm

🛒 Fin box
🔗 https://amzn.to/3Z4vIS5*

🛒 Aluminum T-profile
🔗 https://amzn.to/4cBpa05

🛒 Epoxi resin
🔗 https://amzn.to/4dRMAA5

🛒 Cotton flock
🔗 https://amzn.to/4dBTvx0

🛒Tear-off fabric 85g/m²
🔗 https://amzn.to/3Mr6Agt

🛒Carbon fiber 420g/m²
🔗 https://amzn.to/3XjGCBO

🛒Glass fibre fabric, 200g/m²
🔗 https://amzn.to/473VqYU

🛒EVA-Pad
🔗 https://amzn.to/3MheR6V

#pumpfoiling #pumpfoil #diy #boardbuild #hardfoam #epoxi #flassfiber #carbon