6S Foamboard Radjet Speed Run!! – Not What I Expected....

Описание: Today I’m taking my foamboard Radjet out for its very first 6S speed run. Built from Dollar Tree Adams Readi-Board, reinforced with an 8mm carbon fiber spar, and wrapped in packing tape for strength, this scratch build is all about pushing speed and performance. I’m not a professional pilot and haven’t been flying for very long, so this is as much a learning experience as it is a test of speed.

For power, I’m running a PowerDrive 3536 1800KV motor (linking to the FMS 1750KV equivalent) with an APC 7x8 prop, a CNHL 6S LiPo battery, and an 80A ESC. Control is handled by a Flysky FS-iA6B 6-channel receiver with PPM/iBus output. The setup had me expecting serious speed — but the results… weren’t quite what I imagined.

Watch as I take it full throttle, see the GPS speed reading, and try to figure out why it wasn’t as fast as I thought it was going to be. Was it the setup, the conditions, or something else entirely? Stick around — the next flight might surprise you!

GPS Speed Tracker:
https://www.amainhobbies.com/skyrc-gp...

Parts Used:

Motor: FMS 3536 1750KV Brushless Motor (replacement for original 1800KV):
https://www.horizonhobby.com/product/...

Prop: APC 7x8:
https://www.apcprop.com/product/7x8/?...

Battery: CNHL 6S LiPo:
https://www.amazon.com/CNHL-Black-110...

ESC: 80A Brushless ESC:
https://www.amazon.com/Readytosky-Bru...

Servos: 17g Servos:
https://www.amazon.com/sspa/click?ie=...
https://www.aliexpress.us/item/325680...
Spar: 8mm Carbon Fiber:
https://alofthobbies.com/products/8mm...

Resources:

Free Radjet Plans:
https://forum.flitetest.com/index.php...

Flite Test Forum Speed Challenge Thread:
https://forum.flitetest.com/index.php...

Support the Channel:
If you’d like to support the channel, you can order from ReadyMadeRC using my referral link or code, which I’ve included below. When you do, you’ll get 2% back in RMRC Rewards, and I’ll receive a small commission toward future projects. It’s a win-win — you save on future purchases, and I get a small credit to keep making more videos. The items may not be the exact parts I used here, but they will be fully compatible and may even perform better!

Referral Code: 677045B0

You can either click my ReadyMadeRC referral links or copy the code above and paste it into the Order Comments section at checkout. This ensures both you and I get the 2% rewards.


80A ESC:
https://www.readymaderc.com/products/...
https://www.readymaderc.com/products/...

1200Mah 6S 150C Lipo:
https://www.readymaderc.com/products/...

12g Metal Gear Servo:
https://www.readymaderc.com/products/...