Building a 3D printed Iambic CW Morse Paddle
Автор: Ham Radio, POTA, and Projects
Загружено: 2024-03-02
Просмотров: 1508
Описание:
Please consider becoming a member of the channel - / @w1rcp
This is a key based on Johnathan Kayne's model on Printables: https://www.printables.com/model/6538...
Per his page, this is the needed hardware:
HARDWARE NEEDED:
1x - 3.5mm Audio Jack
3x - M3x6mm cap head screw
2x - M3x8mm cap head screw
1x - M3x10mm cap head screw
2x - M3x16mm cap head screw
2x - M3x20mm cap head screw
6x - M3 Hex Nut (or 10, see next part)
2x - M3 Nylock Nut (I use 4 regular nuts and glue)
1x - 10mm M3 Standoff
2x - M3 Washer
3x - M3 Solder Lug
1x - 0.5x6x15mm Compression Spring
1x - 1.5" piece of wire for ground
2x - 2" piece of wire for two contacts
Warning-Caution-Danger: The audio is distorted because I was right on top of the GoPro, and I talk too loud. It wasn’t distorted when I produced the video, and I’m sorry that it turned out that way. Next time I have to be so close to the camera’s microphone, I will record audio separately on another device.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
