MIC D1 | SYNCO MICROPHONE

Описание: Broadcast Sound Quality
SYNCO Mic-D1 professional shotgun microphone is designed for video production and broadcast applications. 78dB Signal-to-Noise Ratio (SNR) guarantees better audio signal transmission. A premium foam windscreen attached will help reduce environmental noise largely. This microphone will present original sound perfectly, ideal for outdoor recording.

Hyper-cardioid Microphone
As a Hyper-cardioid shotgun microphone, Mic-D1 with high-grade condenser transducer would focus on picking up rich detailed sound right in front of it, and reject sounds coming from side and rear. The elevated sensitivity of -32dB (+/-2dB) allows it to produce strong output levels without having to apply extreme gain at your mic preamp.

CNC Brass Metal Construction
Made of instrument-grade brass, SYNCO Mic-D1 has an elegant appearance and solid construction under CNC processing. Brass material would not damp acoustic vibration, and can deliver a bright and clear sound tone; it also endows Mic-D1 with a strong anti-interference capacity. Matte finish rejects unwanted light reflections.

48V Phantom Power/ AA Battery
Having a gold-plated 3-pin Male XLR connector, Mic-D1 runs on 48V phantom power supplied by most professional video cameras, mixing boards, or recording devices. It can also be powered by one AA battery over 100 hours, which is ideal for DSLR cameras, computers, and other devices that don't offer phantom power.

Selectable 180Hz High-pass Filter
Designed with a high-pass filter button, SYNCO Mic-D1 could remove undesired low-frequency noise and rumble at 180Hz, such as footsteps, or motor noises from record players, air conditioners, blowers etc. Using advanced sound wave interference technology, the Mic-D1 tube would filter out some frequency noise too.

Multiple Mounting Position
The length (11.22 inches) of shotgun Mic-D1 is well suited for ENG, outdoor recording, and camera mounting. A 3/8" to 5/8" mic holder for easy placement on a boom pole or tripod. Through XLRM-XLRF cable and 3.5mm-XLR cable, the Mic-D1 can connect to cameras, camcorders and mixer board etc.

Crisp Natural Sound
SYNCO Mic-D1 is designed for Film, Broadcast & Video Production, superior than most similar products on the market. It will deliver a crisp and clear natural sound smoothly. A SNR of 78dB ensures quality sound picking up effect.

Hyper Cardioid Polar Pattern
Hypercardioid Microphone is highly sensitive (-32dB Sensitivity) to the sound source in front of it, while reducing sound from other directions. A good choice no matter in a professional recording studio or a noisy environments such as a convention floor or sporting event.

Brass Construction
Adopting all-brass tube, the Mic-D1 has a strong anti-interference ability, which can efficiently shield disturb of electromagnetic signals and enable equipment to work normally. Brass material delivers a bright and clear sound tone.

Battery or Phantom Power
SYNCO Mic-D1 supports two power supply ways, including 48V Phantom Power from professional V-mount charger, camcorder or other recording devices; and one detachable AA battery. Convenient for different devices recording.

Gold Plated XLR Connector
A gold plated 3-pin Male XLR connector resists corrosion and guarantees excellent signal transfer. With this connector, Mic-D1 can connect to most professional recording devices for quality audio picking up.

Mic Holder
A Mic holder with 3/8" to 5/8" connector increases the installation methods largely, can easily insert or remove the microphone. It also has non-slip dents that hold the microphone well.

Foam Windscreen
A premium foam windscreen is attached to improve the audio quality and eliminate the background noise, such as wind and vehicles. It's helpful to keep your microphone sanitary by avoiding dust, moisture and spit.

Synco Audio Mic-D1 Features
Broadcast Sound Quality
Hyper-cardioid Microphone
CNC Brass Metal Construction
48V Phantom Power/ AA Battery
Selectable 180Hz High-pass Filter
Multiple Mounting Position
Crisp Natural Sound
Brass Construction
Gold Plated XLR Connector
Mic Holder
Foam Windscreen

please join our official group
Synco Users Philippines

Synco Philippines
#syncoph #MICD1