Make a quick clamp rack with me
Автор: Another Piece of Wood
Загружено: 2023-11-30
Просмотров: 10662
Описание:
Throwing it back to this quick and dirty clamp rack I made after moving into the new shop.
I started my measuring and cutting two 2x4s to the length I needed, and then marked where I wanted the clamps to be spaced out. If you look closely I am using a square with a 1” blade along with a 1/4” setup bar to mimic the spacing I want for the rack.
Next, I set up a dado stack with both 1/8” cutters and a couple of shims to be sure my clamps would freely move in and out of the slots. I then carefully cut out all 2 million slots into the board. Ok maybe it was closer to 40-something but you do the same and tell me what you think 😂😂😂
I then squared the board up on top of another 2x4 and screwed the two together after sanding it all flush. Finally I mounted on my shop wall and loaded it up with clamps.
Tell me what you think!
#Woodworking #woodworker #reels #viral #maker #Cnc #cncwoodworking #tablesaw #dado #storage #organization #clamp #throwbackthursday #tbt
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
