Monnal T60: How to Monitor Ventilation Parameters | S01E06

Описание: Monnal T60 is an emergency, critical care, portable ventilator for professional use.

This quick user video tutorial guide shows how you can monitor your patient's ventilation parameters on the Monnal T60 transport ventilator, created by EO Medical in Singapore.

Definition of monitored values:
VTe: Volume Exhaled per breath cycle, also known as Exhaled Tidal Volume, measured in milliliters (ml)
RR: Respiratory rate averaged over 4 cycles, measured in breaths per minute (bpm)
Ppeak: Stands for peak airway pressure or peak inspiratory pressure, measured in centimeters of water (cmH2O)

Setting ventilation alarms manually:
Press the limit value of the desired monitored parameter. The value will be highlighted upon selection.
Adjust the value by turning the rotating knob, and press firmly once more on the knob to confirm new values.

Setting ventilation alarm automatically:
Press the limit value of the desired monitored parameter.
When the "Autoset" button is pressed, the alarm upper and lower limits are automatically set according to the value measured at the time when the button is pressed.

Check that alarm limits obtained in this way are appropriate for the clinical condition of the patient.

TIMESTAMPS:
0:00 Introduction
0:11 Definition of VTe
0:17 Definition of RR
0:22 Defintion of Ppeak
0:28 How to see next page of monitored parameters
0:35 How to set alarm limits manually
0:49 How to use the automatic alarm set function

See other tutorial videos in the Monnal T60 series here:
Season 1 Full Playlist -    • Monnal T60 Ventilator: Season 1  
Episode 1: How to Setup the Ventilator for Use (without HME filter) -    • Monnal T60: How to Setup the Ventilator fo...  
Episode 1.1: How to Setup the Ventilator for Use (with HME filter) -    • Monnal T60: How to Set Up the Ventilator f...  
Episode 2: How to Perform an Autotest Check -    • Monnal T60: How To Perform An Autotest Che...  
Episode 3: How to Start (A)VCV Mode -    • Monnal T60: How To Start (A)VCV Mode Venti...  
Episode 4: How to Start PSV-NIV Mode -    • Monnal T60: How To Begin PSV-NIV Mode Vent...  
Episode 4.1: How to Set BiPAP via PSV-NIV Mode -    • Monnal T60: How to Set BiPAP via PSV-NIV M...  
Episode 5: How to Select Other Ventilation Modes -    • Monnal T60: How to Select Other Ventilatio...  
Episode 6: How to Monitor Ventilation Parameters -    • Monnal T60: How to Monitor Ventilation Par...  

Season 2 Full Playlist -    • Monnal T60 Ventilator: Season 2  
Episode 1: How to Use PRVC Mode -    • Monnal T60: How To Use PRVC Ventilation Mo...  
Episode 2: How to Measure Plateau Pressure -    • Monnal T60: How To Measure Plateau Pressur...  
Episode 3: How to Set Up ETCO2 Measurement -    • Monnal T60: How To Set Up The CO2 Measurem...  
Episode 4: How to Use CPV Option to Ventilate Patient During Chest Compressions -    • Monnal T60: How to Use CPV option to Venti...  

This material is provided as a supplementary learning tool to the User Manual. It is not intended to replace the User Manual which contains important information on ‘How to use a Product’, including safety symbols.

Happy to assist!
Find out more: https://eo.com.sg/product/air-liquide...
Contact us: https://eo.com.sg/contact-us | Phone +65 6100 5060
Instagram:   / eomedical  
LinkedIn:   / eomedical  

© 2019 EO Medical Pte Ltd. All Rights Reserved.