4E Error Code in Samsung Top Load Washing Machine

Описание: Question/Problem:
“My Samsung Top Load Washing Machine Showing 4E Error Code. This Happens Within 5 to 10 Minutes after Starting the Wash Program. I Want to Know How to Solve This Issue?”

Let’s see how to identify what is the exact issue and which spare parts we need to replace. Please go through the following process step by step.

Step #1
Check The Water Tap: Please Check if their water tap is open or closed. Water will not fill if the water tap is not fully open. Because of this, you will get the 4e error code on display. So please open the washing machine water tap fully.
After this process may be your problem is solved! If not please follow the second step.

Step #2
Check The Inlet Hose Pipe: Please check if is there any damage or leakage in the inlet hose pipe. If you found any damage or leakage, then replace the inlet hose pipe.
Also, check for any clogged in the inlet hose pipe. Follow the below steps for checking the clogging.
Remove the inlet hose pipe from the washing machine side.
Turn on the water tap and see, if water passing properly from the inlet pipe or not.
If water not passing or water is passing but very slowly, then try to run this process for 5 minutes. If still water not passing properly, then replace the inlet hose pipe.
After this process may be your problem is solved! If not please follow the third step.

Step #3
Check The Inlet Filter: Remove the inlet filter with the help of a nose plier and check for any dust or derby. If there is dust or a derby, then water will not pass inside the machine and it will display a 4E error code. Clean the inlet filter with the help of a toothbrush and water.
After this process may be your problem is solved! If not please follow the fourth step.

Step #4
Check The Inlet Valve: Open the back top cover, and check the inlet valve.
Observe carefully if is there any vibration in the inlet valve. If there is no vibration, it means the inlet valve is faulty.
Also, check the voltage with the help of a multimeter. If there is showing voltage properly, it also means that the inlet valve is faulty. It indicates that voltage is coming but the inlet valve not operating. In both cases, you need to replace the inlet valve.
After this process may be your problem is solved! If not please follow the fifth step.

Step #5
Check The Wire Harness: In the above step, if the multimeter does not shows the voltage. It means that the wire is internal damage or carbon particle available in the wire harness. We need to go with continuity testing with the help of a multimeter. So for this process, we need to open the front PCB panel also. Check the wire color code of the inlet valve. Capture the same color code in the PCB side connector. Take the continuity between both side connectors.
If continuity not showing it means there is a problem in the wire harness. So, in this case, you can replace the specific wire or the entire wire harness.
After this process may be your problem is solved! If not please follow the sixth step.

Step#6
Check The PCB Board: In the above process if there is showing continuity between both connectors. But still not showing voltage on the inlet valve connector. It means the PCB board is faulty. So, in this case, we need to repair the PCB board or replace the entire PCB board.
After this process may be your problem is solved! If not please follow the seventh step.