6. How to Configure IPv6 Address | Configuration of IPv6 Address in Hindi | CCNA 200-301 | Part - 6

Описание: Configuring IPv6 addresses in the Cisco Packet Tracer is similar to configuring them on a physical Cisco router. Here's a step-by-step guide:

1. **Access Router Configuration**: Open the Cisco Packet Tracer and select your router. Enter the configuration mode:

```bash
Router enable
Router# configure terminal
```

2. **Enable IPv6 Unicast Routing**: Ensure that IPv6 unicast routing is enabled:

```bash
Router(config)# ipv6 unicast-routing
```

3. **Configure Interface**: Enter the interface configuration mode for the interface you want to configure with an IPv6 address. Replace `interface_name` with the actual name of the interface (e.g., GigabitEthernet0/0):

```bash
Router(config)# interface interface_name
```

4. **Assign IPv6 Address**: Assign an IPv6 address to the interface using the `ipv6 address` command. Replace `IPv6_address` and `prefix_length` with the desired IPv6 address and prefix length:

```bash
Router(config-if)# ipv6 address IPv6_address/prefix_length
```

For example:

```bash
Router(config-if)# ipv6 address 2001:db8::1/64
```

5. **Enable IPv6 on Interface**: Enable IPv6 on the interface:

```bash
Router(config-if)# ipv6 enable
```

6. **Verify Configuration**: You can verify the configuration using the following command:

```bash
Router# show ipv6 interface interface_name
```

This command displays the IPv6 configuration details for the specified interface.

7. **Save Configuration**: Save the configuration changes:

```bash
Router# write memory
```

This command saves the configuration to the router's startup configuration.

Once you've completed these steps, the interface on your Cisco router in Packet Tracer should be configured with the specified IPv6 address. Remember to replace placeholders like `interface_name` and `IPv6_address` with the actual interface name and IPv6 address you want to use.

Cisco Router
Switch
Firewall
Putty
Best CCNA Videos
CCNA Videos in Hindi
How to Access Cisco Devices
How to Use Putty
200-301
200-301 Full Course
Networking
About Router
About Switch
Cisco CCNA
CCNP
CCIE
CCNA Security
CCNP Security
CCIE Security
Network Fundamental
Cyber Security
Full Cyber Security Course
Craw Security
Network Automation
Why We Need Networking
CCNA Hindi
CCNA Videos in Short
About Cisco Router in Short
CCNA Short
CCNP Short
CRAW


#ccna #ccnp #ccie #cisco #networksecurity #firewall #networksecurity #dns #telnet #sshorts #ipv6
#networking #switch #best #ciscopackettracer #routing #dns #dhcp #router #switch #putty

*******************************************
Find Us On:
Telegram:- https://t.me/joinchat/GFZL9xel7jTspUK...
Discord:

/ discord
Facebook:

/ crawsec
Instagram:

/ crawsec
LinkedIn: linkedin.com/in/Crawsec
Twitter:

/ crawsec
Discord:

/ discord
****************************************
Connect With Cybersecurity Expert Mohit Yadav On:-
Website: http://www.mohityadav.com
Instagram:-

/ mohityadavc. .
Facebook:-

/ mohityadavcraw
LinkedIn:-

/ mohit-yadav