My First Syncmode V2 FPV Build

Описание: Building my first Syncmode V2 FPV Frame. In this video we go through the build process and talk a bit about electronics and how to fit out the frame.

Timestamps:
0:00 Intro
0:40 Kit Parts
1:53 Frame Overview
3:27 Frame Build
5:28 Arm Protection
7:37 VTX Mounting
9:29 Looking at Component Spacing
9:55 Electronic Components
10:55 Motor Selection
12:46 Mounting Components
15:37 About Soft Mounting ESCs
17:09 ESC Hard Mounting
17:39 Stack Spacing
18:09 Soldering Tips for FPV
20:18 Soldering Battery Leads
22:14 Mounting the Spike Absorber and Cap
23:32 Motor Mounting and Soldering
23:51 Flight Controller Wiring
24:56 GoPro Session Mounting
26:05 Battery Mounting
27:40 XT60 Soldering
28:37 Close

Components

Frame: Syncmode V2
https://supaflyfpv.com/product/syncmode/

Receiver: ELRS
VTX: Caddx Vista

Flight Controller: HGLRC Specter F460
https://cubefpv.com/product/flight-co...

Motors: iFlight XING 2306 1700KV
https://cubefpv.com/product/motor-ifl...

Props: HQ Juicy J37 4.9X3.7X3 4937
https://cubefpv.com/product/5-inch-pr...

Battery: GNB LiHV 6S 22.8V 1100mAh 120C
https://phaserfpv.com.au/products/gao...

30 Degree GoPro Session Mount STL: Contact me through CubeFpv website and I'll send it to you.

▼ My Website: https://cubefpv.com/
👉 Resources: https://cubefpv.com/home/resources/
🛒 My Webstore: https://cubefpv.com/shop-page-main/

Flight Footage Example Content
Rotor Riot
   / @rotorriot  

GeorgeFPV
   / @georgefpv