Thorinair - Echoes From The Void // Generative Modular Ambient // 1 Hour Relaxation

Описание: Inspired by the cold of The Void itself, travel through the dark depths and see what you will uncover. This generative patch uses Magerit Laniakea, Acid Rain Technology Chainsaw and Avalon Harmonics Nucleus modules as stars of the show.

MP3 320 kbps: https://www.mediafire.com/file/ax7jih...
FLAC: https://www.mediafire.com/file/glxm5v...

Modular Grid Rack (May change with time!): https://www.modulargrid.net/e/racks/v...
Patch Link: https://www.modulargrid.net/e/patches...

This patch features a total of 5 different modules that I have created myself under the brand name Avalon Harmonics (AH). Most of these modules can already be purchased on my Etsy: https://www.etsy.com/shop/AvalonHarmo...
Find out more about Avalon Harmonics here: https://avalon-harmonics.com/
Follow Avalon Harmonics on Instagram for updates:   / avalonharmonics  

PATCH NOTES:

The patch consists of two primary voices: Magerit Laniakea and Acid Rain Technology Chainsaw. The patch is based around using Avalon Harmonics Nucleus to trigger random bursts of sound based on background radiation. No software audio processing has been applied and the patch is fully contained within the rack without any external hardware.

Laniakea Voice:

Gate output from AH Nucleus is routed to AH R&F to smooth out the rise and fall. This signal is then routed to AH CVMod8 Ch1 for the sake of offsetting and scaling before being fed to Laniakea's Cluster parameter. This results in burst of horn-like sounds and buzz that you can hear periodically. Each is a actual Geiger click.

STModular 2xLFO square is fed to AH S&S set to noise source with some slew applied. This generates random slewed values which are then routed to AH CVMod8 Ch2 for offset and scale before being fed to Laniakea's Color parameter.

I am honestly not sure how the Laniakea itself has been set up (at least the secondary parameters). I have been playing around with it until I got a sound that I really enjoyed!

Chainsaw-Popple Voice:

Chainsaw generates a continuous supersaw with some detune on it and feeds the stereo signal directly into After Later Audio's Popple stereo filter.

Same square LFO from before is routed to AH CVMod8 Ch6 to offset it to positive values, and is then routed to Takaab Even Clock Divider to slow it down. 1/2 output is routed to another AH S&S to generate another set of random slewed values. Output goes to AH CVMod8 Ch4 for offsetting and scaling, and is then fed to both left and right FM inputs on Popple.

Inverted Gate output from AH Nucleus goes into AH R&F to control the rise and fall time. Output goes into AH CVMod8 Ch3 to offset it, and then to AH MiX. The same Inverted Gate is also sent to an STModular ADSR. Output from the ADSR goes into the CV input of Befaco Hex Mix VCA. Signal input of the VCA is fed from a secondary 2xLFO output set to triangle mode. This results in a triangle value which ramps up and falls back down when there have been no Geiger clicks for some time. This signal is mixed together with the R&F signal in the AH MiX module and is then routed to Popple's Cutoff input.

Mixing:

Chainsaw-Popple voice (LP4 outputs) is routed in stereo to ALM MFX to apply some stereo delay before being sent to Antumbra 6MIX. Laniakea's voice in stereo is also sent to the 6MIX. Finally, output of 6MIX is sent to STModular's UIT to be output as balanced audio and eventually recorded using Ableton Live.