Smoky Lake Maple Products Liberator Oil Fired Evaporator, Customer feedback, New York State.

Описание: The Liberator Oil-Fired arch utilizes Carlin Commercial Grade burners. This 2'x6' is furnished with a 102CR model with a digital controller. The arch has stainless steel sides and stainless steel stack pipes. The entire arch is factory-insulated with 8lb density ceramic fiber insulation. An access port is welded to the front of the Liberator, giving you a visual into what's going on inside the combustion chamber in order to make proper adjustments with the digitally controlled burner.

The Liberator arch is fully steel framed. The entire perimeter is built as strong as possible, giving you confidence when filling the pans above it with your precious liquid and igniting an intense fire inside it. Additionally, the arch fits the geometry of whatever pan set you plan to use on it, forcing the pan to take full advantage of the heat created within. Leveling studs are furnished on all four corners of the arch, allowing you to perfectly level the arch on less than perfect ground.

The arch utilizes a base stack which transforms from the round stack pipe to a rectangular hub which covers the entire width of the arch. Is is absolutely important to properly spread the heat from the combustion chamber across the entire width of the pans.

The pans are the very ones that established Smoky Lake Maple Products as the utmost manufacturer of high efficiency Evaporators. The Flue Pan has three compartments, the front pan draws your syrup off at it's rear, these facets make the Smoky Lake pan system undisputably the best in establishing and maintaining gradient. These are extremely high output pans, containing 11 raised flues or 10 drop flues. Crucially, we use high grade 22ga stainless steel in the construction of all of our pan sets to insure efficient heat conduction from the fire to the sap. There are no features missing from these pans. Each set comes with state of the art float boxes, drawoff boxes, drain manifolds, sight glasses, and a very strong structured top profile. The dividers in the syrup pan are formed right into the pan making a water tight seal and an exceptionally strong floor- the dividers are not welded in.

SSR OPTION: The "same side reverse" option for these pans is a $650.00 option. This enables you to easily reverse the flow in the front pan without ever moving the pan or dealing with plugs. Reversing flow is as simple as swinging the handles of two stainless steel ball valves. The SSR has been greatly improved for the 2019 pans, especially for those using an auto-draw-off system. Our SSR System is now the best in the industry, it is fully cross flow and now has only one syrup outlet regardless of flow direction. See the attached picture of this new SSR assembly and learn more about it here,    • Smoky Lake Maple Products, Superior Front ...   .