Twin Blade Board Edger

Описание: Function：
1. Precise trimming: Two saw blades can be used to perform precise trimming operations on materials such as plates, cut off irregular or redundant edges, and make the plates have neat and smooth edges to meet the requirements of dimensional accuracy for different processing technologies.
2. Efficient cutting: Dual saw blades work simultaneously. Compared with single-blade sawing machines, more cutting tasks can be completed per unit time, which improves production efficiency and is especially suitable for mass production.
3. Adjustability: Usually, the saw blade's cutting depth, feed speed and other parameters can be adjusted according to different material thickness, width and processing requirements to meet diverse processing needs.

Advantages:
1. Improve processing quality: The double-blade trimming saw can complete the trimming of two edges in one cutting, ensure the parallelism and verticality of the two edges, and improve the processing accuracy and quality of the board. At the same time, due to the high cutting accuracy of the saw blade, it can reduce defects such as burrs and broken edges on the edge of the board, reducing the workload of subsequent processing.
2. Reduce material loss: Accurate cutting can maximize the use of raw materials and reduce material waste caused by inaccurate cutting. By reasonably adjusting the position and cutting parameters of the saw blade, the utilization rate of the board can be increased to a higher level, thereby reducing production costs.
Easy and safe operation: The operation of the equipment is relatively simple, and the operator can master it after a certain amount of training. At the same time, the double-blade trimming saw is usually equipped with complete safety protection devices, such as protective covers, emergency stop buttons, etc., which can effectively protect the safety of operators and reduce the risk of accidents.
3. Extend the service life of the saw blade: Since the double saw blades share the cutting force, the load borne by each saw blade is relatively small, so the saw blade wears slowly and the service life is extended. This not only reduces the frequency of saw blade replacement and reduces tool costs, but also reduces equipment downtime caused by saw blade replacement and improves production efficiency.

WhatsApp: +8617852637025
E-mail: [email protected]
WeChat: +8618854321302