Canon Selphy QX-20 Product Review (part1) incl Comparison vs QX-10 and Zoemini 2

Описание: FULL SETUP IN THE NEXT VIDEO:    • Canon Selphy QX-20 Unboxing and Setup (par...  

Canon Selphy QX-20 Product Review (part1)
00:00 Introduction
https://www.canon-europe.com/printers...

PRODUCT REVIEW
00:30 Small Photo Printers
01:00 Product Review

PRINT SPEED & QUALITY
Print speed can vary dependent on data size, print method, and print finish setting. Print speed is measured from start of printing excluding paper handling.

02:40 Print Photo Card size
04:10 Print Collage
05:15 Print Square Sticker

MORE ABOUT SMALL PHOTO PRINTERS
06:00 vs Zoemini 2
07:00 vs QX-10
08:00 More about Selphy
https://www.canon-europe.com/printers...

Specifications in detail
Printing System
Method
Dye-sublimation thermal transfer printing system
Maximum Resolution
287 x 287 dpi
Colours
3 colour inks (yellow, cyan, magenta) with protective over coating
256 levels per colour (24 bit colour depth)
Media & Cartridge
Sticker Paper
XS-20L: 72 x 85 mm
XC-20L / XC-60L : 54 x 85 mm
Ink Cartridge
Included with media
Image Longevity
100 Years Print1
Print Speeds
Print Speeds
approx. 40 sec2
Printing
Print Modes
Controlled by SELPHY Photo Layout app
Print Settings
Controlled by SELPHY Photo Layout app
Print Method
Direct from Smart Device
Compatible iOS and Android devices via Direct Wi-Fi, using app SELPHY Photo Layout
Power Source
AC Power Supply
Not supported
Battery Pack
Built-in, 20 sheet maximum print capacity per full charge
Power Consumption
3W or less (standby), 62W or less (printing)
Accessories
Media
Colour Ink / Label Set XS-20L
Colour Ink/Lable Set XC-20L / XC-60L 20pack
Colour Ink/Lable Set XC-20L / XC-60L 60pack
Other
USB Type C charging cable (included)
Physical Features
Recommended Operating Environment
5 - 40 °C, 20 - 80% humidity
Dimensions (W x D x H)
Approx. 102.2 x 145.8 x 32.9 mm
Weight
Approx. 455g (excluding ink cartridge and label)

To test the image permanence of prints that are stored in an album, we use an accelerated testing method similar to how the image permanence of silver-halide photo papers are measured when stored in dark places. Print samples are printed with the optical density of 1.0 (each Bk, C, M,Y). The samples are kept in a certain environment of high temperature and 50% humidity. The rate of the decrease in the optical density and rate of yellow discoloration are recorded. The recorded results are then converted to the length of time when print image is kept in an environment of 23℃/ 50％ humidity. 'The point where monochromatic/ reflective optical density shows loss of 30% (starting density of 1.0).

Print speed can vary dependent on data size, print method, and print finish setting. Print speed is measured from start of printing excluding paper handling.