DETAILED! DIY Oversized Tufted King Bed | How to Build a King Bed for $500 | Purp by the Curl

Описание: 📍ALL MATERIALS/TOOLS USED ARE LISTED IN THE BEGINNING OF THE VIDEO📍
****Oversize King Bed Dimensions***
Tufted Headboard:
100" extra wide x 79" tall.
---(I adjusted by an inch to fit through my door)
Bed Frame: top and side of all 3 rails
Side rails 82” long x 12" deep x 12” tall.
Footboard: 100” x 16" deep x 12” tall.
King size mattress, 76" wide x 80" long.

****MATERIALS***
I used 2inch Plywood for all of the below! Get your board cut at Home Depot or Lowes

Items Measurements Quantity
Head Board Plywood 100 W x 79 Tall 1
---Note: My headboard was cut into two pieces in order to equal the above
(96W x 31L & 96W x48L).
To make the frame 100W, I added small pieces (31L x4W & 48L x4W).
I also adjusted the height so it fit my door frame.
--only use this if your board is not already 100inch
Side Rails Top 82in L x 12in W 6
Side Rails Ends 12 W x 12 W 4
Foot bench Top 100 in L x 16 W 1
Foot Bench sides 100 in L x 12 W 2
------Fill in the footboard area the same as the headboard; using 1 of each
4W x 16L ; 16W x 12L & 12W x 4L
------only use this if your board is not already 100inch
Foot Board Ends 12x12 2

I purchased my materials from Home Depot, Walmart, JoAnns & Lowes
--I used between 10-15 yards of fabric

****TIPS****
Purchase fabric using coupons if you're going to a store like JoAnns
--this is where I got my fabric from
Use Upholstery Fabric for the BEST outcome. Other fabric will work but it may tear
Use a work bench if you have it available
Use a nail gun for the frame instead of screws if available
Drape fabric & leave enough to cover the sides before cutting


****TUFTING PATTERN***
--Headboard
10 x10 from edge
--10in in between

Footboard Top & Front
Start at 4inches from each edge (4 inches from top, side & bottom) on all corners of the bench
--then make 8in marks going across
horizontally the space between the top & bottom marks is 13in so the middle button should fall at 6.5in

Side Rails
Start at 2inches from each edge (4 inches from top, side & bottom) on all corners of the bench
--then make 8in marks going across

📍This is explained in detail in the video📍