Replacement for Whrilpool W10295370A / EVERYDROP EDR1RXD1 Fridge Filters - Installation Instructions

Описание: The W10295370-WF filter will replace the following part numbers:
Whirlpool: P4RFWB, P5WB2L, P5WB2L, PS2378001, W10276924, W10291030, W10295370

Works with the following models:
Whirlpool: BRS62CRBNA00Whirlpool BRS70HEANA00, BRS70HRANA00, BRS70HRBNA00, BRS80ARANA00

Compatible with:
Whirlpool: WRS526SIAE, WRS526SIAH, WRS526SIAM, WRS537SIAB, WRS537SIAE, WRS537SIAF, WRS537SIAH, WRS537SIAM, WRS537SIAT, WRS950SIAB, WRS950SIAE, WRS950SIAH, WRS950SIAM, WRS950SIAW, WRS965CIAE, WRS965CIAH, WRS965CIAM

• Flow Rate: 1.9 lpm
• Operating Pressure: min 207 kPa (30 psi) / max 827 kPa (120 psi)
• Operating Temperature: min 0.6°C / max 38°C
• Technology: High quality Carbon Block
• Function: Chemical and Mechanical Reduction
• Capacity: 757 litres
• Service Life: 6 months
• Dimensions: 25cm (length) x 5.5cm (diameter)

Installation Instructions
Note: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow.
1. Locate the water filter in the top-right corner of the refrigerator compartment
2. Lift open the filter cover door. The filter will be released and then eject as the door is opened
3. When the door is completely open, pull the filter straight out
4. Take the new filter out of its packaging and remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed
5. With the arrow pointing up, align the new filter with the filter housing and slide it into place. The filter cover door will automatically begin to close as the new filter is inserted
6. Close the filter cover door completely in order to snap the filter into place. You may need to press hard
7. Flush the water system
8. Reset filter status light following instructions in your owners manual
9. Replace filter every 6 months

https://www.aquabluefilter.com.au/Whi...