How to clean vinyl waterproof mattress
Автор: North America Mattress Corp
Загружено: 2020-11-10
Просмотров: 1460
Описание:
Helpful vinyl waterproof mattress cleaning instructions from North America Mattress Corp. This is a short how-to-clean video for our users, and for people in general, on how to best clean up after unfortunate accidents.
The following is our step by step cleaning and disinfecting instructions:
CLEANING STEPS
STEP 1 – REMOVE FLUIDS
First, remove any sheets or covers to reveal soiled surfaces (if soiled area has dried, then pre-wet with clean lukewarm water and gently scrub with soft-bristled brush or non-abrasive scrubbing pad). Second, soak up liquids with non-abrasive cloth or paper towels and wipe clear all fluids from effected areas.
NOTE: Be sure to check all surfaces (top, sides and bottom) for fluids to ensure an effective cleaning and disinfecting result
STEP 2 – PREPARE CLEANING SOLUTION AND CONTAINERS
Create mixture of mild soap and lukewarm water in one bucket or container (mixture of 1 to 2 drops soap concentrate to 1 quart lukewarm water) and fill a second bucket or container with clean water.
NOTE: North America Mattress Corp. recommends use of mild liquid soap for safe and effective results.
STEP 3 – CLEAN SURFACE
Wipe surfaces down thoroughly with non-abrasive cloth soaked in cleaning solution.
STEP 4 – RINSE & WIPE DRY
First, soak a new non-abrasive cloth in clean water and wipe down surfaces to remove residual cleaning solution. Second, use dry clean non-abrasive cloth to wipe away residual water and any remaining cleaning solution.
DISINFECTING STEPS
STEP 1 – APPLY DISINFECTANT
First, with soiled surfaces properly cleaned, use a trigger-action spray pump to apply disinfectant to all previously cleaned areas. Second, wipe disinfected across all treated surfaces with non-abrasive cloth to ensure any bacteria spread during cleaning is neutralized—you can never be too careful.
NOTE: North America Mattress Corp. recommends use of gentle disinfectants for safe and effective results.
STEP 2 – RINSE & WIPE DRY
First, soak a fresh non-abrasive cloth in clean water and wipe all treated areas clear of disinfectant. Second, wipe dry with new non-abrasive cloth. Let dry before replacing bed sheets.
For more information on our waterproof mattress collection, visit us at: http://t.ly/6OyH
Or call us for more information at: 1800-448-6163
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: