NAVAGE Inside View, Tear Down And Repair Water Lock Vacuum Pump
Автор: opera
Загружено: 2019-12-11
Просмотров: 28509
Описание: Tear down and repair of vacuum pump that sucked in water. Four small holes at inlet prevent water passing. These can also clog with salt and debris. When this happens a vacuum bypass valve opens to reduce suction. Days on a heater could not remove moisture.Case opens by the side. Four screws on bottom must be completely removed as they lock in the body, star/Torx head. Pry open non button side from the back first. Then remove other side. Pull off the top. Three Philips screws remove vacuum/bypass chamber to clean four hole water screen. Black rubber is vacuum release. Do not remove black screw. One more Torx screw removes motor assemble for better access. White silicone membrane over battery chamber is interlock switch. Press center with soft object like Q tip and side button at same time to turn on motor. Not recommended for those with novice mechanical skills. Be patient. This is a tricky assembly. Do not force anything.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
