Notebook cover making out of epoxy resin | Epoxy resin craft | 滴胶笔记本教程

Описание: Notebook cover making out of epoxy resin. Watch more epoxy resin craft videos in my channel. Hope you all enjoy watching this video. Have a nice day.
滴胶笔记本教程来了！！希望大家会喜欢这影片。愿大家有个美好的一天。

Material / 材料：
Epoxy Resin AB 3:1　AB硬胶 3:1
Resin White Paste 滴胶专用白色色膏
Blue mica Powder 蓝色珠光粉
Pink Mica Powder 粉色珠光粉
Glitter Flakes 闪光碎片
Sea blue resin dye 海蓝色色精
Pink resin dye 粉色色精
Gold wording Sticker　烫金色文字贴纸
Notebook Ring 笔记本连体卡圈



Tools / 工具：
Silicone Mold　硅胶模具
Electronic Scale　电子称
Silicone Measuring Cup　硅胶量杯
Popsicle Sticks　冰淇淋棒
Hot glue gun 热熔枪


Instruction for mixing Epoxy Resin 3:1:
1. Clean your mold and tools. 清洁模具和工具。
2. Mixing epoxy resin (A:B in weight ratio 3:1)
Epoxy requires a minimum mass of material for the chemical reaction to occur properly. I suggest to mix minimum 9 grams of resins (Part A) with 3 grams of hardener (Part B). 混合滴胶(A:B 重量比3:1)-环氧树脂需要最小质量的材料，以使化学反应正常发生。我建议至少9克树脂(A部分)和3克固化剂(B部分)混合。
3. Pour Resin (Part A) to Hardener (Part B) into an empty plastic cup (normally I'm using silicone cup). 将树脂(A部分)和固化剂(B部分)倒入一个空的塑料杯(通常我使用硅胶杯)。
4. Make sure to mix the 2parts epoxy according to the weight ratio 3:1 (Part A:B) 确保两份环氧树脂按3:1的重量比例混合(A部分:B部分 3：1)
5. Stir the mixture slowly using stick, mini spoon or silicone stick. This will minimize the possibility of air bubbles forming in the mixture.用小棒或小勺子慢慢搅拌。这将尽量减少在滴胶中形成气泡的可能性。
6.Let the mixture sit for 5-10 minutes to allow any air bubbles to rise to the surface then remove the bubbles by using torch lighter. 让滴胶静置5-10分钟，让气泡浮到表面，然后用打火机将气泡清除。
7. Pour the epoxy resin into mold. Remove any air bubbles which may have formed during the application. Simply place the toothpick on the bubble and draw it towards the surface then remove it using torch lighter. 将滴胶倒入模具中。清除任何可能在应用过程中形成的气泡。只需将牙签放在气泡上，将其拉向表面，然后用打火机消泡。
8. Once applied, please allow minimum 16hours for the mixture to be cured. 倒入模具后至少等待16小时固化。
9. Be sure to check on it periodically to make sure no air bubbles have formed in your design. 一定要定时检查，以确保没有气泡在滴胶内形成。

Notes:
1. Please wear protective mask and nitrite glove during the progress. 施工过程中请佩戴防护口罩及手套。
2. Hard type epoxy resin are suitable for making jewelry, river table, tabletop coating and more. 硬型滴胶适用于制作首饰、河表、桌面涂料等。
3. For Weight ratio A:B 3 : 1 Example 9grams A mix with 3grams B 重量比例A:B 3:1举例:9克A与3克B混合
For volume ratio A:B 2.25 : 1 Example 22.5ml A mix with 10ml B 对于体积比A:B 2.25: 1例22.5ml A与10ml B混合
4. Suggest to add slightly more hardener (5% extra) if use volumetric measurements. 如果使用体积测量，建议添加稍多的硬化剂(额外5%)。
5. Don't add too much colorant at once. Add several times in small amount until you get your desired color. 不要一次加太多的色剂。少量多次加入，直到你得到满意的颜色。



If you like this video, Please do SUBSCRIBE our channel    / @jjcraftandstyle   , turn on the notification🔔, hit the like 👍button and share our videos💞. A big hug for you 🙆🙆and thanks for watching🙇.
如果喜欢这影片，欢迎订阅我们的频道    / @jjcraftandstyle   ，开启小铃铛🔔，按赞👍并分享我们的视频💞。在此给您一个大大的拥抱🙆🙆也非常感谢您的收看🙇。

-----------------------------------------------------------------------

Stay tuned in our YouTube Channel    / @jjcraftandstyle  , facebook book page   / jjcraftandstyle  

The following link are the videos playlist shared by this channel, feel free to watch and your comments are valuable to me ❤🤗

👉DIY LAMPSHADE | 自制灯罩
   • DIY LAMPSHADE | 自制灯罩  

👉SIMULATION CREAM GLUE CRAFT | 奶油胶手工
   • SIMULATION CREAM GLUE CRAFT | 奶油胶手工  

👉EPOXY RESIN ART | 滴胶手工
   • EPOXY RESIN ART | 滴胶手工  

👉UN-BOXING SERIES | 开箱系列
   • UN-BOXING SERIES | 开箱系列  

👉CEMENT CRAFT | 水泥制作品
   • CEMENT CRAFT | 水泥制作品  

👉WASTED MATERIAL CRAFT IDEAS | 废物利用手工
   • WASTED MATERIAL CRAFT IDEAS | 废物利用手工  

👉JUTE ROPE / HEMP ROPE CRAFTS | 麻绳手工
   • JUTE ROPE / HEMP ROPE CRAFTS | 麻绳手工  

👉DIY CARDBOARD BOXES | 纸箱废物利用
   • DIY CARDBOARD BOXES | 纸箱废物利用  

👉POPSICLE STICKS CRAFT | 冰淇凌棒手工
   • POPSICLE STICKS CRAFT | 冰淇凌棒手工  

👉CHENILLE STICK CRAFTS | 扭扭棒手工
   • CHENILLE STICK CRAFTS | 扭扭棒手工  

👉PAPER CRAFTS | 手工折纸
   • PAPER CRAFTS | 手工折纸  

#notebookcover
#makingoutofresin
#epoxyresincraft
#滴胶笔记本
#滴胶教学
#epoxyresinart
#jjcraftandstyle
#resinart
00:00 Introduction
00:26 POURING PROCESS
02:20 DEMOLDING PROCESS
03:49 DECORATING