Best Dimmer Mod! Full Pressure Control 0-14 Bar! Sage Breville Barista Express

Описание: I decided to make this video after I made the mod, I did not think it would work or make any difference, to be honest. Therefore, I don't have any film material from the inside of the machine. But hopefully you can follow my description of how to do it anyway.

With this video, I want to help others with the same problem, where this machine refuses to run at 9 Bars of pressure.

IMPORTANT: My Barista Express was bought i Sweden (230Volts). So, i bought the 220V dimmer. If you live in USA, you will need the 110V one. Links below.

----
How to connect the dimmer:

1. You need to open the machine.
Follow this video (Hoon's Coffee):
   • $6.35 Dimmer Mod | Breville Barista Expres...  
But don’t use Hoon's dimmer. Use the one I'm using and you will get full control of the pressure without any other mods.

2. See the picture at the end of this video to locate the pressure pump and detach the cables connected to it. (Tip: take a picture of it before doing anything :))
You will need to remove the plastic covers, then press down a pin to release the contacts.

3. Now attach the cables that you detached from the pump to the INPUT-side of the dimmer L/N.
You will need to extend the cables of course.

4. Add two new cables from the Output side of the dimmer back to the pump L/N.

I did an 8mm hole on the topside of the plastic cover on the top of the machine - as seen in the video.
----

The dimmer:
Search Amazon/Wish/AliExpress for "4000W SCR dimmer".

Amazon links to the dimmer:

USA - 110V:
https://www.amazon.com/Controller-Adj...


Europe/Germany 230V:
https://www.amazon.de/-/en/WINGONEER-...


I personally ordered from Amazon Sweden:

https://www.amazon.se/WINGONEER-elekt...


Good luck!