Classiq III HD Review - 8 Systems & 15 Games Tested! But Is It Good?

Описание: In this episode, we test out the Old Skool Games Classiq III HD, designed to play Nintendo, Super Nintendo, and Sega Genesis games in 720p HD.

This episode strictly looks at gameplay. If you want a closer look at the hardware, check out our unboxing video right here    • Old Skool Classiq III HD Unboxing - NES, S...  

Testing Results:
Famicom Disk System - As expected, the Famicom Disk System did not work. I don't know of any clone systems that do work with the FDS, short of something like the Analogue NT or the AVS.

Famicom - Through the use of a 60-to-72 pin adapter, the Classiq III HD played Famicom games as expected. It did suffer from some of the same issues we will talk about with the NES in just a moment.

NES - The performance of the Classiq III HD's NES side is virtually identical to that of the Classiq N and the Classiq 2 HD. All three systems suffer from reverse duty cycle issues, meaning the audio in certain games just does not sound correct. The most noticeable test for me has always been the coins and Super Mario Bros, and they just do not sound right here. Other than that the typical issues cropped up similar to other clones, Battletoads locked up on level two which is pretty common. I think the color palette is a bit too muddy for my personal taste as well.

Super Nintendo/Super Famicom - Again, the Super NES performance is virtually identical to that of the Classiq 2 HD. The audio is much better here compared to the NES side, but I still think the color palette is very muddy. Thankfully, I did not run into any game compatibility issues.

Super Game Boy - The Super Game Boy worked by and large without issue, however the audio when I was trying to capture it was extremely hot. I didn't hear this issue when I was playing, so I don't know what issues this may be having with my capture cards. I did have an issue where my first system would not work with Super NES cartridges or the super Game Boy out of the box. But eventually, I got it working.

Sega Master System - Inserting the Master Drive adapter, I was able to play Master System games without any issue. I'm not entirely surprised about this, but it's a nice feature to be able to find.

Sega Genesis - Most clone systems do not work with Virtua Racing, and this is no different. Again, I did not expect it to so I will not hold that against it. Sonic 3 and Knuckles worked flawlessly with the lock-on technology which was great to see, not all clone systems do. Other than that, it played every single Genesis game that I threw at it, minus Virtua Racing.

Why it RoX:
Only $90
Plays the three most popular retro systems
Works with Super Game Boy & Master Drive
10 ft long controller cable
Decent responsiveness
The LEDs look sharp
HDMI out
4:3 & 16:9 modes
Compatible with NTSC, NTSC-J, & PAL games

What could be improved:
I had to buy two just to get this video done
Does not work with Virtua Racing or Battletoads
Reverse duty cycle issues on the NES causes audio issues
NES and Super NES color palettes are muddy
Captured audio on Super Game Boy did not sound good
Not a fan of the default NES button mapping
System was set to PAL out of the box

Should you buy one?
If you already have a decent way to play NES and Super NES games and you just need the Genesis, I would recommend buying a standalone Genesis or Genesis clone instead. This doesn't do anything different on the NES or Super NES side then the Classiq N or the Classiq 2 HD. As such if you already have a way to play those systems you don't need this. If you have nothing, this is an okay way to start out, but Old Skool really needs to address their quality control. Spending money on two different systems just to get one working unit is not acceptable.

#oldskool #ClassiqIII #VideoGames #Nintendo #Sega #Famicom #SNES #SFC


The footage used in this review is used under the Fair Use laws, referenced below:

https://www.law.cornell.edu/uscode/te...