Infinix Not 7 X690 Charging Strip Problem Solution | Sub Board Charging Ways & Jumper Repair
Автор: Mobile hardware solutions
Загружено: 2025-12-05
Просмотров: 56
Описание:
This video shows the complete hardware solution for Infinix Not 7 X690 charging strip problem, including USB port issues, sub-board inspection, charging IC/PMIC testing, voltage checks, track repair, and jumper ways. Learn step-by-step repair for charging faults caused by damaged charging strips or sub-board circuits. Perfect for mobile repair technicians.
✅ 30 Most Searching Titles
Infinix Not 7 X690 charging strip repair
Not 7 X690 sub-board charging ways
Infinix Not 7 X690 USB port problem
Not 7 X690 charging strip jumper solution
Not 7 X690 sub-board charging repair
Infinix Not 7 X690 PMIC charging fix
Not 7 X690 battery connector ways
Not 7 X690 charging line missing
Infinix Not 7 X690 USB voltage problem
Not 7 X690 charging IC repair
Not 7 X690 charging strip replacement
Infinix Not 7 X690 slow charging solution
Not 7 X690 fake charging repair
Not 7 X690 sub-board voltage test
Infinix Not 7 X690 step by step charging repair
Not 7 X690 USB port continuity
Not 7 X690 charging circuit repair
Infinix Not 7 X690 fast charging not working
Not 7 X690 charging IC jumper
Not 7 X690 sub-board solder repair
Infinix Not 7 X690 battery not detected
Not 7 X690 USB track repair
Not 7 X690 charging strip testing
Infinix Not 7 X690 PMIC voltage check
Not 7 X690 hardware charging solution
Not 7 X690 multimeter charging test
Infinix Not 7 X690 charging voltage missing
Not 7 X690 USB short circuit fix
Not 7 X690 complete charging guide
Infinix Not 7 X690 sub-board jumper ways
✅ 30 Step-by-Step Repair Guide
Power off the device and remove back cover.
Disconnect battery carefully.
Remove screws and open mid-frame.
Inspect USB charging strip for physical damage.
Test USB connector pins for continuity.
Clean USB port with IPA brush.
Remove sub-board for charging inspection.
Inspect PMIC and charging IC voltages.
Check VBUS and battery lines on sub-board.
Test coil and diode on charging path.
Jumper broken track if detected.
Replace faulty capacitor or resistor.
Test USB voltage output to battery connector.
Reflow solder joints of USB connector.
Inspect sub-board traces for burnt spots.
Replace damaged sub-board if needed.
Connect battery and test charging.
Check fast charging output.
Verify multimeter readings for proper voltage.
Inspect PMIC heating issues.
Test phone boot while charging.
Ensure voltage stable across all rails.
Check USB port stability under load.
Test full battery percentage increment.
Reassemble sub-board and mid-frame.
Confirm proper voltage on all charging lines.
Test multiple chargers for consistency.
Inspect and clean all solder joints.
Close back cover securely.
Final testing: normal charging restored.
✅ Hashtags
#InfinixNot7X690 #ChargingStripProblem #SubBoardRepair #USBConnector #PMICRepair #ChargingWays #MobileRepair #HardwareSolution #StepByStepRepair #TechnicianGuide
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
