Make a Lamp From a Whiskey Bottle

Описание: I was given an empty whiskey bottle by a friend who said he wanted to make a lamp out of it but didn't know where to start so of course I offered to help. I have dabbled in cutting glass before but have never tried cutting bits off bottles so this was a learning experience for me. After checking out a few different videos I attempted to use a thermal shock method of splitting the bottom off the whiskey bottle however this was a dismal failure. I ended up using a specialist glass cutting disc for my rotary tool mounted in a jig I built to cut the bottom off the whiskey bottle.

The next task was to turn an old table leg into a lamp base which I did by drilling a hole through the centre with a hole saw wide enough for my lamp fixture but not the collars to pass through. I also used a larger hole saw to cut a groove for the whiskey bottle to sit in, and finally I used an even larger hole saw to cut a disc out of a bit of old table top to create a solid base. I used a router to tidy up this base and give it a nice rounded edge, before gluing the two pieces together with wood glue. Once the glue dried I gave it a coat of boiled linseed oil followed by a spray of hardwood oil before fitting the bulb and whiskey bottle.

If you have documented any similar builds I am more than happy for you to link to your own videos in the comments.

Check out the Instructable I wrote for this project if you want to try one yourself, don't forget to vote for me in the contests

https://www.instructables.com/id/Make...

Please consider becoming one of my patrons on Patreon and help me finance bigger and better videos in the future

  / jpsworkshop  

Finally, visit my social media channels, like, follow, tweet, leave comments. I appreciate people leaving comments and will always reply to those who take the time to do so (that is unless you are looking at this in 5 years time and I have 8 million subscribers and its physically impossible to respond to you all)

  / jpsworkshop123  
  / jps_workshop  
https://www.instructables.com/member/...

~-~~-~~~-~~-~
Please watch: "Building A Giant Petrol Powered Bristlebot - Upcycling a 2 Stroke Engine"
   • Building A Giant Petrol Powered Bristlebot...  
~-~~-~~~-~~-~