RC EXCAVATOR HUINA 580 V4/HUINA 550/ KOMATSU BUILD.

Описание: Well time to get back into this project id say. I have been working on stuff, but kinda been picking away at the low hanging fruit, so to speak. I didnt feel like get into a big amount of work last night, but in the process found it actually pretty easy to screw the ring gear down to the 550 base, and then the 580 metal part fits tightly around where it spins, so i do need to grind that down a c-hair for it to spin freely however once i have that sorted i think that might be the most challenging part. I have to replace a bunch of cylinders, a major wiring clean up because i am running external limit switches on a bunch of stuff. lead weight is gonna be the key on this model to counter balance the boom and dirt scooping. there is however a good little bit of clearance under the bottom so i might flatten out a big piece of lead, and screw it to the rear underside, and then also try adding and painting some lead black around the sprockets also alot of space will be used for the electronics and battery so leads going to have to be placed outside. i will however make some detail and have a bit of a lead counter weight on the back, like machines have in real life. might try and hidethe reciever under the seat too, basically wherever it can go itll go lol, jam it in there......... I really like these tracks, way more then the 580s ones. Dont know why huina wouldnt scale out the sprockets and guide wheels on the 580 to make it more scale, but way she goes............ adapt/overcome hahahaha.