How to Replace Rear Liftgate Lock Actuator 2006-2012 Toyota RAV4

Описание: Buy Now!
New Door Lock Actuator from 1AAuto.com https://trq.video/ic-1ADLA00212

This video shows you how to install a new rear liftgate lock actuator from TRQ on your 2006-2012 Toyota RAV4. Power door lock systems typically use some sort of actuated motor to drive the lock mechanism. If the actuator breaks, then the door lock will no longer operate electronically.

This repair was done on a 2010 Toyota RAV4 Limited 3.5L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2006 Toyota RAV4
2007 Toyota RAV4
2008 Toyota RAV4
2009 Toyota RAV4
2010 Toyota RAV4
2011 Toyota RAV4
2012 Toyota RAV4

Tools you will need:
• Pocket Screwdriver
• Trim Tool Set https://trq.video/oaLQ-1AXXX00006
• T30 Bit
• Ratchet https://trq.video/oczR-1AXAA00016
• Gloves https://trq.video/obPp-1AXSS00048
• Safety Glasses
• Pick https://trq.video/oaee-1AXAA00037

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.