Sunhans 3000mW 35dBm 2.4GHz IEEE 802.11b/g/n WiFi Indoor Signal Booster WiFi Signal Amplifier

Описание: Sunhans 3000mW 35dBm 2.4GHz IEEE 802.11b/g/n WiFi Indoor Signal Booster WiFi Signal Amplifier Signal Repeater , https://www.aliexpress.com/item/40008... , https://www.s-booster.com/2-4ghz-3w-w... , Email: [email protected] .

This indoor signal booster can increase the effective range and coverage area of your Wi-Fi network., It is Ideal for increase the 2000-2500Mhz frequency devices.

Technical specifications
SKU: 0305SH100023
Model: SH24BTA-N
P/N: 24BTAN24014
Operating range: 2400~2500MHz
Channel width: 20Mhz&40Mhz
Supported standards: IEEE 802.11b/g/n
Operation mode: Bi-directional, half-duplex, time division duplex
Connector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside)
Output power: 3000mW (35dBm)
Input power: 0 ~ 20dBm
Transmit gain: 15 - 18dB
Receiver gain: is less than or equal to 12dB
Noise figure: = 3.5dB typical
Frequency response: + 1dB over operating range
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20 C to +70 degrees C degrees
Operating humidity: Up to 75% relative humidity
Material: Cast aluminum
LED light: Power status LED and activity status LED
Booster weight: 94g
Booster size: 8.6 x 5.1 x 1.8cm
Package weight: 370g
Package size: 21.3 x 13.5 x 5cm

Package Includes:
1 x SH24BTA-N 3W Wifi Signal Booster
1 x RG316 cable with SMA connectors (20cm)
1 x 6dBi omni antenna
1 x power supply (US/EU/UK/AU Plug)
1 x English user manual

Attention:
The power amplifier is not suitable for use in high power devices

Use
Step 01: Remove the Antenna from the Wireless Router (Access Point).
Step 02: Use this cable (RG316) to connect Amplifier 'input' port with router 'output' port: note that cable is in standard spec.
Step 03: Connect the antenna with 'output' port of Amplifier.
Step 04: Power the amplifier with the matching source adapter: DC 12V.