How to Replace Rear Engine Splash Shields 2007-2013 BMW X5

Описание: Buy Now!
New Engine Splash Shield from 1AAuto.com https://trq.video/ia-1ABMX05842

This video shows you how to install new rear engine splash shields from TRQ on your 2007-2013 BMW X5. The plastic shields found under most modern cars do a lot to protect the engine and accessory components from water, snow, salt, and other road hazards. Over time they may become damaged or even lost.

This repair was done on a 2013 BMW X5 xDrive35i 3.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 BMW X5
2008 BMW X5
2009 BMW X5
2010 BMW X5
2011 BMW X5
2012 BMW X5
2013 BMW X5

Tools you will need:
• 10mm Socket
• 8mm Socket
• Trim Tool Set https://trq.video/oa7D-1AXXX00006
• Gloves https://trq.video/ocLS-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.