Mira Event XS Teardown: Pump, Solenoid, PCB Strip Out DIY Guide

Описание: The Mira Event XS is a powerful unit, but if you're facing low pressure or a leak, you need to safely access the internal motor, pump, and control board. This detailed guide walks you through the safe and systematic teardown of this power shower, focusing on the careful removal of the electrical PCB, the Solenoid Valve (which controls water flow), and the main Pump Motor assembly.

🛑 EXTREME DANGER WARNING! This power shower uses a 240V pump motor and solenoid valve, and is connected to high-flow water supplies. You MUST isolate the electrical supply at the main consumer unit (fuse box) AND shut off both hot and cold water isolation valves before removing the cover. Safety is the absolute priority.

In this video, we guide you through the 3 stages of safe component removal:

Casing and PCB Access: How to safely remove the front cover, detach the power connections, and unscrew the main Printed Circuit Board (PCB), which controls the pump.

Solenoid Inlet Valve Removal: Locating and removing the solenoid valve, which is usually found at the water inlet and controls the flow of water into the pump.

Pump and Mixer Strip Out: Disconnecting the pump motor wiring and pipework to remove the entire pump assembly and the thermostatic mixer unit (the component responsible for blending hot and cold water).

Follow this guide to successfully strip down your Mira Event XS and replace the failed component!
Learn more about repairing electric showers with my Amazon ebook
https://amzn.to/3Ulu232 As an Amazon Associate, I earn from qualifying purchases

#MiraEventXS
#PowerShowerRepair
#ShowerTeardown
#ShowerPump
#SolenoidValve
#PCBRemoval
#DIYHomeRepair
#240VRepair
#MiraShower
#ApplianceDisassembly