Red pearl touch up system. රෙඩ් පර්ල් එකක් පැච් කරමු .

Описание: Touching up red pearl paint can be tricky because of its multi-layered nature. A red pearl system typically consists of a base coat, pearl mid-coat, and clear coat. Here’s a step-by-step guide to properly touching up a red pearl finish:

Materials Needed

Red base coat (matches factory color)

Pearl mid-coat (with correct pearl mixture)

Clear coat (2K for durability)

Sandpaper (400, 800, 1500, 2000 grit)

Primer (if needed)

Spray gun or touch-up pen

Masking tape & plastic sheeting

Rubbing compound & polish

Step-by-Step Process

1. Prep the Area

Wash and dry the damaged area.

Sand the damaged spot with 400-800 grit sandpaper to smooth out the surface.

If bare metal or plastic is exposed, apply a thin layer of primer and let it dry completely.

2. Apply the Red Base Coat

Lightly spray thin coats of red base color, letting each coat dry for 5-10 minutes.

Blend the color into surrounding areas to avoid a hard edge.

3. Apply the Pearl Mid-Coat

Mix the pearl coat correctly to match the original finish.

Apply light coats until the pearl effect matches the rest of the panel.

Be careful—not too much pearl, or it may look too light or too dark.

4. Apply Clear Coat

Once the pearl coat is dry, spray multiple light layers of clear coat for protection and shine.

Let it dry for 24-48 hours before buffing.

5. Sand & Polish for a Seamless Finish

Wet sand with 1500-2000 grit sandpaper to smooth out any imperfections.

Use rubbing compound, followed by polish, to restore gloss.

Tips for a Perfect Match

✅ Test spray on a separate panel before applying to the car.
✅ Blend edges into the existing paint for a seamless look.
✅ Work in a dust-free area to avoid contamination.
✅ Use the correct pearl ratio—too much or too little will affect the final color.