Sewer Robotics UV patching LIVE at RO KA TECH 2023

Описание: Super fast, clean and hassle-free UV patching with 3 minutes preparation time and 8 minutes curing time. It is possible with the Sewer Robotics UVP125 packer and GRP lining material of a roll. The UV- cured liner material is supplied on 60cm (24”) wide rolls. Just remove the protection film and load it on the packer.

The installation process in simple steps:
1. Cut to size (for a single, or dual layer in the right diameter)
2. Remove the inner protection film
3. Remove the outer protection film
4. Secure for transport
5. Position the packer
6. Inflate the packer
7. Cure 8 minutes
8. Deflate packer
9. CCTV Post Inspect

The material is a light-curing glass-reinforced polyester (G.R.P.), manufactured in a sheet form comprising a matrix of polyester resin, E-type glass reinforcement, special inert fillers, and photoinitiator, sandwiched between two thin nylon protection films. The upper film, which is permeable to UV light, stays during the application (with the exception of the overlap). Another advantage is the low emission of styrene and glass fiber particles during storage, transport, and application.

The material is available in two thickness options: 1.5mm or 2.0mm. It can be installed as a single layer with a 1.5mm or 2.0mm thickness, or as a double layer stack with a minimum thickness of 3mm or 4mm.

Contact [email protected] for more information or request a live, online demonstration!