How To: Mitre Tiles Easily | BC45 Assembly | Tilers Tools

Описание: SHOP BC45 HERE: https://bit.ly/3Rl7Ww9

In this video, Jim explains how to assemble and use the BC45 to perform high quality mitre finishes to tiles. The BC45 is a great tool designed to perform 45° bevel cuts to a high-quality finish directly on construction site (actual mitre angle: 47°).

If you like what you see in this video, why not check out our tile cutting range to find the BC45 and similar products! Visit us at www.tilerstools.co.uk/product-category/tile-cutting

BC45 Technical Information:
Works leaning and sliding on the edge of the tile (or slab). This guarantees a fast and precise work execution and allows to work without any limit on length.

The anti-scratch plastic slides ensure optimal smoothness on the slab/tile.

Maximum slab/tile thickness: 16 mm (0.63”) with Ø115 mm (4 1/2”) blade; 20 mm (0.79”) with Ø125 mm (5”) blade.

The two handles easily allow the necessary pressure during the entire length of the bevel cut (entrance, slab side, exit). This will guarantee both optimal results and maximum ergonomics.

Cutting depth adjustment: adjust the dedicated knobs to determine the amount of material to be removed (further or closer to tile glaze). Once the adjustment is set, it stays true for any tiles/slabs thicknesses.

Blade tilt adjustment: tilt the blade to prevent its rear from chipping the edge of tiles/slabs.
Suitable with almost all angle grinders with power between 600-1100W.

Available for grinders with M14 arbor attachment (art. 433BCOH EU) and for angle grinders with 5/8‘’ – 11 arbor attachment.

Dry use (standard version) or wet use (to perform wet cut in combination with kit for wet cut and dust suppression. A Power Raizor must be equipped with cordless/battery operated angle grinder or corded model with IP54 rating or higher.

Supplied with Ø 115 (4 1/2”) cross-turbo blade and maintenance manual.