How to Make Adjustments to New Tech Machinery's Board and Batten Profile

Описание: Learn more about the Board and Batten Profile: https://newtechmachinery.com/learning...

How do you make adjustments to New Tech Machinery's board and batten profile?

Part 1 -    • How to Changeover to New Tech Machinery's ...  
Part 3 -    • How to Configure NTM's Board and Batten Sh...  

**********************************
New Tech Machinery knows making adjustments to a profile can slow down your workflow on a job site. The second part of this series will show you every step you need to know to make standard adjustments and get you back out on a job site.

In part 2, Steve Levonyak, plant manager, walks you through step-by-step how to make adjustments. Check out the timestamps below in case you need to return to a section of the video.

In this video:
0:00 - Intro
0:16 - Safety first
0:51 - Cut a 6-foot piece and jog through the machine
1:14 - Inspect the panel
1:53 - Safety first, power down the machine, lock out and tag out
2:05 - Check the dimensions of the panel
2:33 - Entry guide adjustment
3:35 - Check to make sure the panel is 90 degrees
4:00 - Adjust the R12 station if 90-degree adjustments are needed to the inside leg
4:48 - Adjust the R14 station if 90-degree adjustments are needed to the outside leg
5:47 - Adjustments for downhill and uphill
6:40 - Power machine back up, jog a new panel through
6:47 - Check adjustments you have made
7:01 - Outro

Interested in learning more about a machine? Contact us here: https://hubs.ly/H0f817Z0

**********************************

FOLLOW THE NEW TECH MACHINERY TEAM
►  / new-tech-machinery  
►  / ntmmazzella  

Visit Our Website: https://hubs.ly/H0f82Sn0
Subscribe To Our Blog: https://hubs.ly/H0f82T00

Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury.

New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.