How to Make Your Own Fiberglass Car Parts.

Описание: In this video we go over the process I use to make about 99% of my fiberglass parts. It covers a few more tools than the previous episode but still at the ideal trade-off between quality of results vs cost.

For simplicity, we do not cover the mould making step in this video. That will be covered in a future video.

List of materials and tools in this video:
Gloves
Wax
Acetone
Respirator
Gelcoat
Gelcoat Gun (3.0mm nozzle HVLP spray gun)
Styrene
Resin of choice (Polyester used in this video)
225 GSM chopped strand fiberglass matt
450 GSM chopped strand fiberglass matt
Chip brushes
Fiberglass roller
Sandpaper
Cutting tool (angle grinder, air saw, rotary tool, etc...)

If you would like to see how a mould like this is made, here are two videos from my channel that show both a beginner and more advanced approach.

Beginner:
Making the plug and starting the mould:
   • Making a Fiberglass Mould for the Rear Gar...  
Finishing the mould and making the final part:
   • Finishing the Rear Garnish. Widebody Miata...  

Advanced:
Plug making and starting the 3 piece mould:
   • How To Make Fiberglass Fender Molds. Part ...  
Finishing and polishing the moulds:
   • How To Make Fiberglass Fender Molds. Part ...  



Huge thank you to High Performance Academy for supporting the channel. If you're interested in any of the courses they provide on building and modifying cars, consider checking them out at the link below. Doing so will give me a small kickback and help directly support my builds.

hpcdmy.co/Tofu

Be sure to use the coupon code: "TOFU50" for $50 off at checkout!



Enjoy the video.

If you enjoy these videos and want to see more, please consider supporting me on Patreon. I would love to be able to work on builds like these full time and your support helps make that possible. There are heaps of special rewards and behind the scenes posts so please check it out.

  / tofuautoworks  


Also feel free to checkout my Instagram where I post regular updates on all of my builds.
  / tofuautoworks  

Timestamps:
00:00 - Required materials
01:15 - Waxing the mould
02:17 - Applying gelcoat
06:16 - First layer of fiberglass (coupling coat)
10:15 - Rolling out air bubbles
11:49 - Sanding first layer
12:35 - Main fiberglass layup
16:07 - Removing from the mould
17:05 - Trimming and sanding
19:23 - Drilling and cutting holes
23:24 - Completed part
23:52 - Outro