First Impression Phrozen Sonic Mighty 8K

Описание: First Impression Phrozen Sonic Mighty 8k
This video focus mostly on printer hardware and software test.
there will be no print result yet.
Sonic Mighty 8k comes with 28um xy resolution, new touch screen ui.
So there are lots of stuff to be tested, unfortunately the camera app wont be ready till august 2022.
After i am done calibrating the printer, i will show the print result and comparing it to sonic mini 8k in the next video.

additional info
when connecting printer to pc through wifi, you are require to input the admin and password from the printer sharing network sub menu, to your pc network after input printer ip address

kindly support my channel   / dennyswang  

Build Plate Leveling Tester
https://cults3d.com/en/3d-model/vario...

Bottom Exposure Calibration
https://cults3d.com/en/3d-model/vario...

Exposure Tester
https://cults3d.com/en/3d-model/vario...

Thicker Validation Matrix
https://cults3d.com/en/3d-model/vario...

Print Angle Model
https://cults3d.com/en/3d-model/vario...

Amder Antialiasing Test
https://cults3d.com/en/3d-model/vario...

Stability Torture Test
https://cults3d.com/en/3d-model/vario...

Oval Tube / Tall Elipse
https://cults3d.com/en/3d-model/vario...

Compression Disk Test
https://cults3d.com/en/3d-model/vario...

Wire Mesh
https://cults3d.com/en/3d-model/vario...

Checkout Phrozen Website for Phrozen printer
https://phrozen3d.com/?aff=98

If you in Indonesia, you can buy Phrozen printer at tokopedia here :
https://tokopedia.link/I1hQGRPRpmb

If you are in Indonesia, you can buy NFEP at tokopedia here
https://www.tokopedia.com/yuishimokaw...

Disclaimer
Phrozen send me this printer free of charge and no money change hand.
Thank you Phrozen for the opportunity.

Chapters :
0:00 - Intro
0:22 - In the box
0:48 - Printer built
1:42 - Build plate
2:25 - Camera
2:39 - Resin tank
4:24 - Dial indicator test
5:13 - Light test
6:01 - Noise level
7:00 - Touch screen
10:46 - Wifi
13:28 - Leveling tester low bottom exposure
13:49 - Print time difference
16:35 - Velocity / print speed
19:00 - Lyche print preview
19:33 - Outro
20:00 - Z Tower torture test
22:51 - Thank you all Patron

#3dprinting #3dprinter #phrozen

If you interested to check my other work
Here my social media
FB :   / nobodycustom  
FB :   / 3dmikron  
IG :   / dennys_wang