Dillon super swage 600 Mod Auto load & Auto eject, 1200 rounds per hour!
Автор: Modifier 472
Загружено: 2016-08-24
Просмотров: 7156
Описание:
Discription 2:26 into video. 50 rounds in 2 1/2 minutes. There are no permanent mods to the swage.
Slide a spring over the case locator rod for the auto eject feature (I used latex tubing) then slide a piece of vinal tubing over case locator rod to hold the spring in place. Adjust the spring tention for the auto eject feature.
Install a guide rod 6" next to the two mounting points of the swage unit in the side that works best for your setup. I also installed a second guide rod close to the handle with a slight ark to keep the paracord from coming in contact with the swage unit.
Unscrew the knob from handel. slide a garden hose washer over the handle to the base of handle. Install two 20mm x 90mm RC car springs over the handle. Reinstal the knob onto the handel.
Tie paracord around the nut at the base of the case locator rod. Then tie the paracord around the top of the handle above the springs.
You will need to adjust the length of the paracord to get the proper timeing. You can also make adjustments to the case locator rod.
Watch and pause the video to help answer your questions. Thanks
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: