How to Build Merged Foundation Wildwood Den | Fallout 76

Описание: #Fallout
Today we'll go over How to Build the Wildwood Den prefab with Merged Foundations in your #Fallout76 Camp.

I've had a few inquiries from channel viewers that ran into some bumps along the way, so I put this quick guide together to help out where I can. The biggest challenge of this one isn't putting together the blueprint to merge the foundations into the prefab, but getting it to actually place.

This How to Build video uses the Wildwood Den prefab from the Fallout 76 atomic shop. It also makes use of the foundation flip blueprint trick.

We start off by setting the height of our foundations using the Wildwood den as guide. The Den should be placed where the foundation is as high as possible to make alignment easier. The height needs to be at a high just below the lip of the lover building molding. This piece is above the concrete foundation of the prefab. Making the foundation higher will result in it being above the floor of the Den once the merge happens, which won't look good.

Once we have the height of our foundations right, we build a U shape with a 5-foundation width. Then we need to put in three walls that will be part of our blueprint. The walls all need the wallpaper side facing the interior of the build. Once the walls are in place, we can store the foundations we put in place to get the wallpaper facing the correct direction.

Now we need to get our Wildwood Den in place for the blueprint. We'll use the center wall as a guide to put in in place. Having the center wall as a doorframe during this process will make it easier. Make sure that when you place the Wildwood Den, that you ensure is as high as the terrain allow, just as we did initially when setting the foundation height.

Now we can blueprint our resulting structure, which includes 3 foundations, 3 walls, and the Wildwood Den.

Placing the blueprint is the biggest challenge of the build. The game can be very temperamental and specific on what will allow it to place. To get it to place, you'll need to ensure that the skirting of the foundations, all of them, is higher than ground level. This can be hard on a perfectly flat piece of ground, and also on ground that had a dip in the center. It's actually easier to place on terrain with a slight incline toward the center, giving the outside foundations plenty of clearance at the skirting level.

I hope this helps everyone out, especially those that were asking for some tips on how to get the merge to work with this prefab.

Thanks for Watching!

Don't forget to LIKE, SUBSCRIBE and SHARE so you get the latest content from Vladministrator Gaming! It's the best way to support my channel, and its FREE!

You can also find me at the links below.

https://www.vladministrator.com
  / vladministrator_gaming  
  / vladgaming  
  / vladministrator_gaming   https://www.redbubble.com/people/vlad...

#Vladministrator