Use A Chainsaw To Fell A Big Poplar Tree !

Описание: A Little Wisdom Helps You Become Smarter !

When using a chainsaw to fell a big poplar tree, here are the simple ways to make it fall in a targeted direction :

Observation and Planning

Observe the Surroundings :
Carefully examine the environment around the poplar tree, including nearby buildings, electric poles, other trees, and areas where people are active. Determine the safe direction for the tree to fall, ensuring that there are no obstacles in that direction and enough space to accommodate the tree body !

Plan the Cuts :
Determine the positions of two cuts on the tree trunk. The upper cut should be on the side of the expected direction of the tree's fall, and the lower cut should be opposite to the upper cut and slightly lower than it !

Cutting Operations

Make the Upper Cut :
Use the saw to cut horizontally into the tree trunk at the position of the upper cut from one side of the trunk. The depth should be about one-third to one-half of the diameter of the tree trunk. Then cut in from the other side, making the upper cut wedge-shaped, with the tip of the wedge pointing in the direction of the tree's fall !

Make the Lower Cut :
Start cutting horizontally into the tree trunk at the position of the lower cut from the opposite side of the trunk. When cutting close to the bottom of the upper cut, stop cutting, leaving a small part to connect the trunk, thus forming a hinge !

Guiding the Fall

Insert Wedges :
Insert one or more wedges at the bottom of the lower cut, on the side opposite to the direction of the tree's fall. Gently tap the wedges with a hammer to make the trunk gradually lean in the predetermined direction !

Pull and Guide :
If the tree is large or the tilting speed is slow, you can use a rope tied to the upper part of the tree. People can pull the rope in the safe area in the direction of the tree's fall to assist the tree to fall in the predetermined direction !