PLYWOOD DRINK MATS/ COASTERS - Scrap bin challenge

Описание: In this video I made some plywood coasters. DETAILED ARTICLE http://goo.gl/ZYTyid

link to participants playlist    • Scrap Bin Challenge 2016  

After sanding the final measurements are 10 x 90 x 100 mm

VV OTHER ENTRIES VV

Alain Vaillancourt    / lgosseuxdbois  

John Zhu    / johnzzhu  

Jeff Ferguson http://www.gowoodwork.com

Chris Cute    / @chriscute7528  

Stephan Pöhnlein    / pipolinoaustria  

Fabian Hentschel    / fabianstinyworkshop  

Manhattan Wood Project    / manhattanwoodproject  

Jon Peters    / jonpeters1000  

Average Joes Joinery    / averagejoesjoinery  

Shavings and Awl -    / shavingsandawl  

John Heisz    / jpheisz  

FastEasySmartTOOL    / fasteasysmarttool  

Tom Howbridge    / tomhowbridge  

Andrea Arzensek    / arzensekandrea  

Dominic’s Woodworks    / dominicswoodworks  

I ripped my 18 mm thick plywood down to 100 mm wide then set up a stop and set my fence to cut 12.5 mm strips referencing off of the stop. I then spread glue on the pieces and glue them together with the ply laminations facing outwards. I then proceeded to do a lot of sanding to get them flat, I previously tried some varnish I had but it looked terrible so I used some boiled linseed oil, it works fine although at some point i want to invest in some tung oil. I might cover another technique of making these in a future video.

I would highly recommend you use the highest quality you can get as it will make your life easier as it will have no voids, I used a scrap
piece I had.



With thanks to Piter P for providing the Spanish description and title. And also thanks to Dominic bender for hosting it.

Twitter   / tomhowbridge  

Google plus https://plus.google.com/u/0/+TomHowbr...

facebook   / tomhowbridgevideos