Pyramid Tea Bag Packing Machine with 4 head scale

Описание: Nylon tripod tea bag packing machine We are a manufacturer in China and specialized in counting packaging machine for 14 years.

Introducion
I . type and specification
Ⅱ.Main technical data
Ⅲ.Electrical control
3.1 Panel introduction
3.2 The computer screen introduction
Ⅳ .Preparation before production
4.1 Preparation before starting to work
4.2 The installation of the packaging film
4.3 Pilot Run
Ⅴ .Machine Commissioning
5.1 Equipment Speed 5.2 Bag length adjustment
5.3 The former adjustment 5.4Photoelectric adjustment
5.5 Horizontal sealing parts adjustment
5.6 Vertical sealing parts adjustment
5.7 feeding section adjustment
Ⅵ . type electrical wiring diagram
Ⅶ .maintenance and service
7.1 Cleaning 7.2 Lubrication
7.3 periodic maintenance
7.4 Work environment
Ⅷ. Common Failures and Elimination Methods
Ⅸ. After-sales service directory

This is a automation precision equipment which is suitable for the sealing packing of green tea ,red tea , Scented tea .coffee, healthy tea , the herbal tea ,granule triangle teabag.
This machine is mainly composed of three systems: the precision mechanism transmission system, automation control system and pneumatic transmission system
1.The main controller of the machine is PLC touch screen control converter, part of the pulling paper and the horizontal sealing rotating part adopts servo motor, more accurate, it can be finished within 2 bag length automatic photoelectric with standard, digital automatic adjustment cursor mode, meet the precise positioning .color touch screen is human design, operation interface is clear ,parameters setting is simple .
2.Institution transfer system is mainly composed of the feeding part .forming part .drawing paper .horizontal sealing parts .vertical sealing parts. blanking etc (see figure 1-2). The whole machine adopts mechanical transmission and combination of electric, installation and debugging simply and conveniently, running smoothly, sealing strong, good bag appearance; Accuracy can finish bag making and filling. sealing. counting .measurement etc; choosing tray , electronic scale and other blanking ways according to different material

The main technical parameters
Capacity：30-60 bags/Min
Packing material：Nylon, Polyester net non-woven fabrics. Ultrasonic sealing materials
Bag-making method： Ultrasonic three sides sealing cut way
Bag size : Triangle bag 50-80mm（one side）
Flat bag：60-90（W）*40-80（L）mm
Packing film：100mm.120mm.140mm.160mm
Dimension：800* 1000*1800mm
Power： 220V 2.0Kw
Weight：400Kg
Application；The triangle tea bag packaging machine is suitable for: green tea, red tea, scented tea, herbal tea, coffee, health tea, granule etc
Operating Environment：Without a lot of dust, the temperature is 5 ~ 40, cannot freeze; Relative humidity is not more than 60%，not be dew.

Repair and Maintenance
7.1 Clean
Must continue to clear the remaining paper, powder and binder, make the equipment in clean condition, so as not to affect the normal work of the equipment
Can use a vacuum cleaner or downless cloth to remove powder .when there is no production of raw materials, can use low pressure of compressed air to blow, but must pay attention to the powder can not be blown into the bearing and rotating components. hot water or alcohol can be used to clear adhesive.
Use clean soft cloth to Wipe with equipment, if necessary, use soap to wipe with the paint surface, nickel plated and stainless steel parts surface can dip in with alcohol or other appropriate solvents to wipe, and wipe dry.

Lubrication
1. Checking the oil level in the tank whether it is at the center of the oil mark or not Periodically, if not ,should add more. replacing the oil on the fuel tank oil change one time every 6 months (or 1000 hours) . when changing ,firstly ,open the equipment on the side of drainage hole plug, let the oil flow out, and finally use the brush dips in petrol or kerosene ,when the bottom of the tank is cleaned, and then pour into the clean lubricating oil
2. The knuckle bearing on the equipment ,adopt the same machine oil lubrication in the fuel tank , add lubrication once a day
3.All rolling surface of cams on kerosene oil lubrication use the extreme pressure lithium grease lubrication, cleaning lubrication once a week
4.All spur gear ,cone gear, chain which are without lubricating oil adopts the extreme pressure lithium grease lubrication, cleaning lubrication once every two months
5. Replace lubricating oil of the reduction gearbox in reduction gears once every

You need , We pack !
Website: www:worldepack.com You need , We pack !
Guangzhou Worlde Packaging Machinery Co.,Ltd
Phone/Whatsapp/skype/Wechat:+8613660767956
Email:[email protected]
Follow us :
  / worlepack  
   / @wepack9410  
https://hardwarepackingmachine.blogsp...
http://worldepack.com/news/